开云体育

Actually, it's suggested to use no digipeat path for high altitude balloons, as at their typical cruising altitude, they can hit several counties directly without digipeating, so waking up several

Just curious.? Are there dog trackers on the 2 meter band or did you cobble something together?The maximal update rate I was able to experiment with was to hard program and test transmit a position

That sounds dangerously like a way to clog the national channel with your burst. Sure, you'd save a tiny bit of time not having to key up and send multiple flag bytes on the channel before starting

Right now i have two radios running in to YAAC, 1 on 144.390 national frequency, the other on a different frequency for my dog trackers. I have the dog trackers transmitting a a high rate. Is it

You were correct Andrew, very easy fix, I must have look at that page 5 times and not seen it. Thank you for your help!? On Sun, May 3, 2020 at 10:52 AM, Andrew P.<andrewemt@...> wrote:

Greetings. What exactly do you want to do here? YAAC already supports timeslotting, configurable on a port-by-port basis, although that is limited by how much extra timing baggage the external TNC

Persisting locally-defined objects across restarts is easy. This is a configurable capability in YAAC. Go to the menu choice File->Configure->Expert Mode, select the Behavior tab, and check the

Hello all and thanks for letting me join the group.?The problem I am having is when I create an object it works fine as long as I have the program running, or don't loose power etc. Then the object

Thank you.

The recommended place to begin is with a radio listening to your local traffic through a TNC (hardware or software). If you don't already have a hardware TNC, the software ones actually perform much

Hi. im new to YAAC. ?How do I get a passcode? ?Where do I begin? delivers1234 kr3lim

Hello is it possiable to add more digi setting like conesctive packet send. and to set the time to hold packets for the burst send.

Great explanation. Thanks so much.

Random Internet packets don't get transmitted to RF by transmit-capable I-gates. There are very specific rules implemented by both APRS-IS backbone servers and I-gates to ensure the local RF channel

I have YAAC configured as a two way iGate. I'd like the packets I send from my phone using APRSDroid to be transmitted locally by my iGate. The phone packets are reaching APRS-IS as I seem them on

The supplemental I-gate filters are saved when you press the ENTER key (on a PC-type keyboard). If you change the field again, press ENTER to confirm the change.

There are several solutions to your request. Obviously, YAAC will be promoted here (since I wrote it for exactly this kind of work), although there are other Linux/Unix APRS programs. However, a 10"

Previously posted on Facebook-APRS. It was suggested that I post here. Looking for a APRS receive/decode/display map solution for a upcoming race event.? Most solutions revolve around an IGate. I

Thanks Andrew, I knew the problem was on my side somewhere. It's been running steady for a few hours now. Thanks Tim KD9DBG

It looks like the problem is in the filter you specified for the APRS-IS port. You have a filter of "r/100". However, that is not correct syntax for an "r" filter. For your location, an expression