开云体育

The radar raster map is out of position. It is centered about 100miles north of where it should actually be. Last night's rain over northern Missouri was showing up between Omaha and Des Moines. Any

Base YAAC can't do that. But the smallscreen plugin can partially do that (since it was intended for mobile operation). It's a bit of a screen real-estate pig for desktop usage on a regular monitor,

I have some messages that I send on a recurring basis, such as the APRSThursday reports, POTA Spots, status reports, etc. Is it possible to somehow store a number of canned messages that I can just

Please export your configuration (File->Configuration->Export to File) and email me the resulting XML file privately. It sounds like somehow your alert configuration isn't getting saved. Andrew,

When I attempt to setup the weather alert nothing happens. I configured the email tab and it sends the test email. I go to the weather alert tab add the conditions and then add the stations. When I

Actually, thinking about your proposed fix, it would have worked too, because you effectively did the same "flip around the 45-degree axis of reflection" as the "90 - " change did, without the extra

Hi Andrew, Thanks for looking at this! . . Yes, that looks good here. BTW I got my information from https://mode-s.org/decode/content/ads-b/5-airborne-velocity.html which included the formulas. I

Thank-you very much!!! Was hoping for a fix.

Actually, I just confirmed my error per my stated fix to your fix. I just realized that the only time I see ADSB traffic at a known altitude and bearing, it's because the wind is blowing in such a

Actually, both the original code and your fix are incorrect, but might be showing almost-correct cases near the axis of reflection. That is because geographic bearing has 0 degrees at True North and

Hi Andrew, The adsbdecode plugin has a bug where the computed ground track based on aircraft velocity is incorrect. This results in the icon, bearing and track prediction being incorrect. The issue

The graying out is to indicate a packet more than 80 minutes old (i.e., obsolete for a tactical network), per Bob Bruninga WA4APR's original design directives.. I'll add a feature to disable the

I tweaked the retention times so the messages show in the list for longer. However, after an amount of time, the text changes from black to a light blue that is almost impossible for me to read. I'm

Re: location of YAAC configuration: Since you are using a Linux operating system, the Java Preferences backing store is in a subdirectory of your home directory, .java/.userPrefs/org/ka2ddo/yaac . In

Thank you Andrew. You made me go back to re-examine my settings. Not sure what I changed back but it is currently working. I did have a question for all. Where on the Raspberry PI disk structure is

If you have APRS logging enabled, all your received traffic will be recorded in the AX25rcvd* log files (transmitted packets are unconditionally logged in the AX25xmit* log files), and can be read

Are received messages stored or logged someplace? I just started participating in the APRSThursdays thing. When I send out my CQ, in the messages window I see messages pouring in. I don't always have

Greetings. Oops! And I even downloaded the updated website certificate, but forgot to install it. The website is accessible now. Re: docs for the NWS shapefiles: the YAAC help index will take you to

My web browsers tell me that there's a problem with the web site. Checking the SSL CERT - it expired this morning. On to my question: Where is documentation regarding integrating National Weather

Hi Andrew, checking to see if you have fixed it. I did a clean YAAC install today and still see the issue. Thanks!