开云体育

Hey folks- I have been running an RX I-GATE on a raspbery pi running YAAC for a couple of years now. I am using direwolf and an SDR receiver. I'd like to add a TNC and a radio to make it a fill in

Greetings, all. My server that hosts the ka2ddo.org website (which hosts the pre-processed map archive for YAAC) is suffering a disk drive failure. I am in the process of upgrading to a new physical

It does, thank you very much.

Randy W4ACR wrote: You have two issues here. The APRS-IS server passcode used to authenticate you to the backbone is linked to your callsign. If you change your callsign, you need a new passcode

I have been reading, reconfiguring, testing, reading some more, repeat, repeat for now several weeks. I cannot seem to get this little project work as expected. I am trying to build a 2 way I gate

I recently received my vanity call sign and when i change it in yaac, yaac stops working, meaning that nothing i do in yaac makes it to APRS.fi. It tells me that my new call sign is invalid. When i

Its working! Sincerely, Eugene Mosqueda *Dominus Providebit* [email protected]> wrote:

Thank you. I notice the transmit on the cwop is disabled. I don't have any rf items (radios etc connected. is there something i need to also disable? Sincerely, Eugene Mosqueda *Dominus Providebit*

You can see the traffic (packets/hour) to each of the CWOP servers here, http://www.wxqa.com/checkservers3.html Russ KB0TVJ

Thank you Andrew. I'll give all of that consideration.

For TNC, I’m using direwolf combined with DRA-34 (cm108 GPIO) Signalink USB (VOX) or a Cheapo $8 USB sound card plus USB to Serial for RTS-based keying. I’ve used each of these sound cards with

Ah, because most of them aren't licensed amateur radio stations legally authorized to transmit their weather data on the radio? :-) aprs.fi has data feeds from more than just the APRS-IS backbone.

Hmmm... that's odd. I presume you are using the Serial_TNC port type to communicate with your PK88. It sounds like the PK88 is upset that it is not getting proper modem control signals for hardware

hi. not sure if this was discussed but why don't i see this on YAAC but i see them on aprs.fi? Sincerely, Eugene Mosqueda *Dominus Providebit*

Masen KF7HVM, What do you use for the tnc? Thanks KB8UIH -----------------------------------------From: "Masen KF7HVM" To: [email protected] Cc: Sent: Thursday January 12 2023 12:11:40PM Subject:

On Thu, Jan 12, 2023, 11:11 AM Masen KF7HVM <kf7hvm@...> wrote: > I’ve had good luck with old Chromebooks converted to run Linux… if you > don’t need GPIO, these are nice because they have

I’ve had good luck with old Chromebooks converted to run Linux… if you don’t need GPIO, these are nice because they have integrated battery, display, and keyboard. Also can be easily had for <

I've used two BTT 3D printer boards and they are good quality copper boards. Never tried this one. wrote:

https://biqu.equipment/products/pi4b-adapter-v1-0 Anyone have any experience with this?

Hello all, I have a PK88 that I've been playing with to beacon my station and send messages. I was using putty and the TNC commands to do that. I decided to experiment with objects, so I installed