开云体育

I just joined this group. I have a Microsat WX 3 N that is fully operational as a digipeter/Igate. I am also going to set up and configure my new Peet brothers weather station with it. I remember

next beta build#203 of YAAC ("Yet Another APRS Client"), re-created 2024-Sep-27 downloadable from https://www.ka2ddo.org/ka2ddo/YAAC.html or

Looks like you're good then re: absolute barometric pressure bounds. The US MADIS lower limit is 568 HPa, and the reported average at the top of Mount Kosciuszko is around 880HPa. Andrew,

Given Andrew's notice of the compressed coordinates issue with YAAC, the comment may or may not be allowed.?? You might want to try re-enabling it after a YAAC release that provides for weather

Mount Kosciuszko is the tallest mountain peak in mainland Australia at 2,228 meters (7,310 feet) tall. It is located in the state of New South Wales, in the southeastern part of the country. Mount

2024-09-27 14:50:52 AEST: *VK7DSH-1 ( https://aprs.fi/?c=raw&limit=&call=VK7DSH-1 )* >APU25N, VK7RMD* ( https://aprs.fi/?c=raw&limit=&call=VK7RMD ) ,WIDE3-2,qAR, VK7DIK (

Also, regarding the green boxes and "tan" text. That actually is probably red text indicating that field looks unreasonable compared either to other nearby weather stations, or against absolute

Ah, that's interesting. YAAC is not decoding the weather data from VK7DSH-1 because it expects the uncompressed course (wind direction) and speed to begin the weather data, but that station is using

I don't know anything about how YAAC displays weather stations, but I was curious what you mean by VK7DSH-1 having a "message tacked on the end"??? I'm not seeing anything out of the ordinary in

I now have my Weather station and another listed in the Health Monitor and monitoring them in Weather Station Status. VK7DSH-1 is not being displayed correctly, course and speed are the only fields

Hello, Mike. I'm not sure I quite follow you. Are you referring to the View->Weather Status dialog for your local station? Or the popup window on the map when you click on a station? The latter shows

Hello Andrew, When I click on my weather station icon my weather data is nicely displayed in a window. How about the same format for weather stations other than my own and to allow each of these to

The BulletinBoard view will display any bulletins that you receive (i.e., someone on your RF channel or within your APRS-IS port filter has to send them). The retention period for all YAAC displays

Thank you Andrew. Yes some of that was typo and most was just wrong on my part. I have made some changes ?so we will see what happens.? A couple more questions. Is it possible to populate the

Someone else is already forwarding those weather alerts from all the US NWS field offices to the APRS-IS backbone. What Dale is apparently trying to do is get those reports from his local NWS field

Soooooooo.. I have to have a little fun here as I am intrigued by this discussion. If I'm reading this right, we can take a Weather Alert and feed that to APRS via YAAC? If true, I want to learn

The difference between the APRS-IS port filter and the supplemental Tx I-gate filter is as follows: The APRS-IS port filter controls what extra comes _into_ YAAC from the APRS-IS backbone. The

Back when I was using UI-View I use to gate wx warnings to RF from 2 od my area NWS offices. UI-View had a special area to add stations you wanted to gate. I would put NWSDDC* and NWSGLD* in that list

You can delete the entire contents of some tables. For example, if you open the View->Local Objects table, you can choose File->Clear Table to delete every local Object. But there's nothing

Once you have imported a POS file is there a way to un-import it too?? I have'nt found a way other than closing YAAC and restarting, or deleting each object individually. -- Mark