开云体育

Finally got a chance to look at this. I see that every attempt to render the map is aborted in under a second. Per chance, are you using GPS for a position source and have enabled auto-centering the

Greetings. Sorry for the slow response. I have reviewed your YAAC configuration file, and (assuming that you have a valid passcode entered for your APRS-IS port, there is no reason why your system

Hello! I was doing some testing today and was looking at the “Station/Object List” sorted by “Last Rcvd”. I noticed that this was sorted by string value, not time. “1h” came first,

Andrew, you right, that was the problem...! Thanks fort he fast help... It now runs perfect.... I missed that checkbox ! 73 es 55 Wolfgang DL6SW -----Ursprüngliche Nachricht----- Von:

Greetings. I suspect your problem is that your beacon is configured to use GPS coordinates, so if there _is_ no GPS data coming in, YAAC will never send a beacon. I will check the wizard to see if it

Hello Andrew, And the others OM`s , I'm not 100% sure if I found a bug, but I think I'll ask to be sure. I reinstalled my Raspberry Pi to install a few updates and reinstalled

I am also using Direwolf as a TNC and iGate on a Pi. I use YAAC to connect to it over my network. You can configure Direwolf to be your iGate, no extra software required. According to the Direwolf

I see the system removed my email address. Oopsy. My config file is attached with 1 thing redacted. What am I missing? I would still like to get my node to Igating correctly. Ray. WR7AY

I've been using a NINO TNC for a few years with raspi, mini-pc, android tablet/phone, and windows pc. it has no extra features like a full TNC might, just KISS interface. Having never used anything

Bud, I have a similar configuration.? YAAC running as an i-Gate (no digipeating). One feature I like is being able to pull up the map from YAAC from any device in the house with

I'm liking that RL-20

I *might* have a spare Masters Communications DRA around that I could use. So perhaps I'll see if I can set that up first, provided I don't need the DRA elsewhere right now.

A hardware TNC will still work if you have one. I would never say that software was the only answer.

forgot the interface! I am partial to the Masters Communications <http://www.masterscommunications.com/> series of interfaces have been using a RL-20 for several years at one of our sites with

OK I already run direwolf with my USB SDR receiver. Do you have a sound card radio interface that you would suggest to interface the software layer with the radio?

direwolf is the only answer if your have a computer on site run direwolf it will run circles around hardware devices

Hey folks- I have been running an RX I-GATE on a raspbery pi running YAAC for a couple of years now. I am using direwolf and an SDR receiver. I'd like to add a TNC and a radio to make it a fill in

Greetings, all. My server that hosts the ka2ddo.org website (which hosts the pre-processed map archive for YAAC) is suffering a disk drive failure. I am in the process of upgrading to a new physical

It does, thank you very much.

Randy W4ACR wrote: You have two issues here. The APRS-IS server passcode used to authenticate you to the backbone is linked to your callsign. If you change your callsign, you need a new passcode