开云体育

HI Andrew I installed the new beta 152 and notice that the timed beacon does not seem to be working.? I have YAAC set to beacon every 30 minutes.? I can beacon by pressing the space bar or the BCN

Thanks. This is great! I haven't yet been able to get telemetry working, this should do the trick.

next beta build#152 of YAAC ("Yet Another APRS Client"), created 2020-Jun-12 downloadable from https://www.ka2ddo.org/ka2ddo/YAAC.html or

Thanks Andrew That explains it. Bob

Greetings. Re; diff between I-gate and S-gate: you said it: the frequency being monitored to forward to the Internet. Also, S-gates generally aren't transmit-capable, i.e., Rx I-gate. Re: your

I'm trying to set up a Sgate in my regional area 160km south of the big smoke. I'm using a RPi, a RTL-SDR, and direwolf. It works as an Igate. What's the difference between an I gate and a S gate?

Somehow I missed this over the past few weeks, but it's a great question.? APRS has traditionally been a network of "push" information...the assumption has always been that the digipeater sysops know

Should have sent this to the list as well as to Don, so others could use this information.

For what it's worth, I have a Raspberry Pi-3B in my car, running pretty much with no problem. At least, it has not shut down due to temperature. I do have the little fan installed, along

I'm planning on going mobile with YAAC and MOBILINK Bluetooth. In my home, I have no issues. I'll be connecting to my Samsung Tablet which has data to pull the map part of YAAC. I'll be using my

Another Duh! I'm using a android Samsung tablet paired to the mobilink tnc3. It quits because it gets warm. I live in the cold country. I hope the pi 4 won't give me too much trouble with heat. I

DUH!! [image: image.png] *Don Poaps* *New Westminster, BC* *VA7DGP DATA* *VA7QU VOICE* *Winlink: va7qu@... <va7qu@...>* *Subject://wl2k *

The "Refresh all existing map tiles" checkbox says to only updates tiles that you have downloaded before. Since you don't have any previous tile files, there are none to be updated. Uncheck that box,

I just did an SD reflash and loaded the latest KM4ACK build a revision 4. Setting up YAAC only issue is the map. I get No map this time. lost in trying to get this to work. 73 [image:

You didn't happen to create a application launch file and stick it in the autostart directory, did you? ________________________________________ Sent: Thursday, June 4, 2020 9:49 AM To:

New install of YACC on a pi with the new May 2020 buster load. Open program, configure settings and run for a while. Close program and about 2 seconds later it opens again. The second time I close it

Yes, it does. Hmmm... so you should have the latest version of YAAC as of when you ran the KM4ACK script, and build 151 was posted on May 20th. Did you enter your station location

I'll attach the PI 4 tomorrow. I did the YAAC install from KM4ACK. I have a feeling it comes from the source. Not sure but will check in the AM. 73 *Don Poaps* *New Westminster, BC* *VA7DGP

You can pan the map with the arrow keys on your keyboard, or just drag it with the mouse. The buttons above the map control the zoom. Click the button with the house on it to center the map on your

AS noob when it comes to YAAC and Linux. In the Configure Map. I can't seem to figure out how make the map expand. I only get 1/2 a screen. I like to cover the Vancouver City out towards Hope BC. What