Ah. Standards are such wonderful things; there are so many to choose from. :-(
Kamtronics has always been inconsistent with the TNC2 standard. However, Yaesu decided that their proprietary format on their APRS-capable radios would be inconsistent with both TNC2 _and_ Kamtronics formats. So I can't advise you to try the Yaesu port driver either.
However, the Yaesu format is close enough to the Kamtronics format that I can probably hack the Yaesu port driver to support both. But it won't be available until the next build comes out.
Andrew, KA2DDO
author of YAAC
________________________________________
From:
[email protected] <
[email protected]> on behalf of kh6mp@...
Sent: Wednesday, December 16, 2020 4:08 PM
Subject: Re: [yaac-users] Monitoring KPC3+ in Command Mode instead of KISS?
I've captured some output with the KPC3+ in command mode with monitor on. I've pasted *some* of it below but I've attached a much larger capture as a txt file. This was captured with PuTTY and pasted into notepad on Windows.
That would be great if you make this fly!
Mahalo,
Mitch
KANTRONICS KPC3PMX VERSION 9.1
(C) COPYRIGHT 2002-2005 BY KANTRONICS INC. ALL RIGHTS RESERVED.
DUPLICATION PROHIBITED WITHOUT PERMISSION OF KANTRONICS.
cmd:KH6HHG-9>R0UPXW,NH7C-5,WIDE1*,WIDE2-1: <UI>:
`T/{n@Fk/'"8w}|!'&''X|!w!&!|3
KH6HHG-9>R0UPXW,NH7C-5,WIDE1,KH6MP-1,WIDE2*: <UI>:
`T/{n@Fk/'"8w}|!'&''X|!w!&!|3
