Note that you can't share the TNC between YAAC and javAPRSSrvr; only one program can own the serial port connected to the TNC.
Assuming you're going to have YAAC control the TNC, create a port of type Serial_TNC and specify the serial port device name connected to the TNC, your callsign-SSID, and the correct baud rate. You don't connect the TNC and YAAC to the Linux AX.25 kernel;
all the AX.25 logic is in YAAC so you don't use kissattach or /etc/axports.
If you want YAAC to forward the received packets to javAPRSSrvr, also create a port of type APRS-IS and connect it to your local javAPRSSrvr's client port.
Hope this helps.
Andrew, KA2DDO
author of YAAC
Sent from my Verizon 4G LTE smartphone
toggle quoted message
Show quoted text
-------- Original message --------
From: Jean-Pierre Desilets <jeanpierredesilets@...>
Date: 1/4/20 12:56 (GMT-05:00)
To: ka2ddo@...
Subject: ax25 kiss tnc
Hi Andreew
i have? install YAAC on? my Ubuntu 18.04 machine running javAPRSSrvr??
and? ax25 tnc? in kiss? mode .
How to connect? this tnc to? YAAC? ?? ( In aprx? , interface is
ax25-device? ve2se-3? )
tnx de Jean-Pierre? ve2se
