I'm not familiar with the TNC-Pi9k6; is it an upgraded copy of the TNC-Pi? In any case, what serial port and baud rate did you use with PiGate? It should be the same.
Andrew, KA2DDO
author of YAAC
________________________________________
From:
[email protected] <
[email protected]> on behalf of Bill AA6BD <bill@...>
Sent: Tuesday, September 22, 2020 5:09 PM
To:
[email protected]Subject: [yaac-users] How to set up TNC-Pi9k6
I got a TNC-Pi9k6 from WVCARC. I tried it with PiGate and it worked so I believe the hardware is OK. Now I want to use it with YAAC. How do I configure it on s port as a TNC? I tried to use /dev/ttyAMA0 at 19200 baud which was the only port offered by YAAC when I added a serial-TNC port but that doesn't seem to work. When I click Test Port, I see nothing. What is the correct way to configure a TNC-Pi9K6 for YAAC?
