?

What serial port baud rate are you specifying in YAAC and what baud rate did you set in the D700 control head?

?

________________________________________

From: [email protected] <[email protected]> on behalf of Joseph LaFerla <joe@...>

Sent: Wednesday, September 2, 2020 12:00 PM

To: [email protected]

Subject: Re: [yaac-users] Fixing support for Java and YAAC on Microsoft Windows

?

I am starting with the APRS mode receive only.? So I have created a Kenwood Port in YAAC and gave it com4 which is setting for my comport in windows.? I can see the packets coming in on the control head but they do not appear in YAAC.? So I should be in receive only for now but no stations are coming in.? They still appear in the control head.

?

Joe

?

Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10

?

From: Andrew P.<mailto:andrewemt@...>

Sent: September 2, 2020 11:30 AM

To: [email protected]<mailto:[email protected]>

Subject: Re: [yaac-users] Fixing support for Java and YAAC on Microsoft Windows

?

How are you configuring your radio/TNC versus YAAC? If you are using a Kenwood D700 in APRS mode (where it displays the packets on the control head screen), then you have to use the Kenwood port type in YAAC (not the Serial_TNC port type), and it's receive-only. To transmit with a Kenwood, you have to put it in PACKET (not APRS) mode and give up the control head view, and use the Serial_TNC port. Note also that your YAAC port has to be configured to use hardware flow control, and your serial adapter has to have the modem control signals hooked up (instead of being just a three-wire RxD/TxD/SGND connection).

?

________________________________________

From: [email protected] <[email protected]> on behalf of Joseph LaFerla <joe@...>

Sent: Wednesday, September 2, 2020 11:23 AM

To: [email protected]

Subject: Re: [yaac-users] Fixing support for Java and YAAC on Microsoft Windows

?

HI Andrew

?

I had the C++ 20210 redistributable but I reinstalled it anyway.? When I run YAAC using COM4, YAAC opens the port with no errors , I can hear stations coming in but nothing appears in my packet sniffer.? If I run yaac under raspberry pi, it runs fine.? I would like to run yaac under windows so that I can use the built in tnc of my TMD700.? Thought I would let you know.

?

Joe

VA3JLF

?

?

Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10

?

From: Andrew P.<mailto:andrewemt@...>

Sent: September 2, 2020 9:59 AM

To: [email protected]<mailto:[email protected]>

Subject: [yaac-users] Fixing support for Java and YAAC on Microsoft Windows

?

Greetings, all.

?

For those who haven't been able to get YAAC working on Microsoft Windows since accepting a Java 8 upgrade past build 281, I think I have a fix. But I can't build the fix into YAAC because it requires installing a licensed Microsoft product.

?

So, you need to download and install the Microsoft Visual C++ 2010 SP1 Redistributable Package (either x86 or x64, depending on the version of the Java runtime you are using); note it won't hurt (other than using extra disk space) to install both versions on x64 version of Windows. I hope I have the correct year of the Redistributable. This can be downloaded from the Microsoft website at

?

https://www.microsoft.com/en-us/download/details.aspx?id=8328? (x86 version)

?

https://www.microsoft.com/en-eg/download/details.aspx?id=14632 (x64 version)

?

Let me know if this still doesn't fix your problem.

?

Andrew, KA2DDO

author of YAAC

?

?

?

?

?

?

?

?

?

?