Re: YAAC over IP not showing on map at aprs.is
开云体育I'm not sure if your beacon is correctly configured. Do you indeed have a GPS receiver connected to your YAAC system with a Serial_GPS or GPSD port to bring the GPS data into YAAC? YAAC will not send GPS-based position reports unless it is receiving
valid GPS positions from its local GPS.
If someone else is sending your beacons, then aprs.fi would display that beacon's comment, or the historical last non-empty beacon comment.
Regarding status messages, they are on the next tab after the Beacon tab in the expert-mode Configuration dialog.
Hope this helps.
Andrew, KA2DDO
author of YAAC
From: [email protected] <[email protected]> on behalf of SV?SGS via groups.io <sv0sgs@...>
Sent: Wednesday, January 22, 2025 11:40:58 AM Thank you for your quick reply.? I am a little confused.? I think I have the beacon configured correctly.? See pic.? I also changed the text for the beacon.? I seem to be getting position reports of my own station now.? See next pic.? However, the text
msg is not updated.? It keeps showing you www address.? What am I doing wrong?? Also, how do I send a status msg?
?
|