Re: Incorrect Position on YAAC
开云体育Ercan,
Also please note that your sample traffic showed only position reports from the YM3KCN-4 station, and no position reports at all for the I-gates. If YAAC doesn't receive position reports about the I-gates themselves, it will never "know" where
they are.
Andrew, KA2DDO
author of YAAC
From: [email protected] <[email protected]> on behalf of Andrew P. <andrewemt@...>
Sent: Wednesday, August 7, 2024 9:45:37 AM To: [email protected] <[email protected]> Subject: Re: [yaac-users] Incorrect Position on YAAC No station that had sent a real position report message would be using that icon/overlay combination because question marks aren't legal overlay characters; YAAC uses it for exactly that reason to indicate vicinity-plotted stations
until it hears a position report about that station itself, when it will locate the station at its reported location instead of the best-guess with the station's correct icon.
Bob Bruninga WB4APR (SK) wrote up the concept of vicinity plotting at
If you don't like vicinity plotting, you can turn it off in the YAAC expert-mode Configuration dialog on the Behavior tab.
Hope this helps.
Andrew, KA2DDO
author of YAAC
From: [email protected] <[email protected]> on behalf of Lynn Deffenbaugh <kj4erj@...>
Sent: Wednesday, August 7, 2024 8:17:21 AM To: [email protected] <[email protected]> Subject: Re: [yaac-users] Incorrect Position on YAAC If it helps diagnose the issue at all, here's where APRSIS32 shows these three stations this morning:
If I had to guess, I would say that YAAC hadn't yet received a position update for the 2 IGates and therefore didn't know exactly where to plot them.
Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32
On 8/7/2024 3:29 AM, Ercan TOSUN via groups.io wrote:
|