Thanks Andrew. That was the problem.? Too much data in this old head and sometimes it gets lost.
73, de Ian
VE3EP
toggle quoted message
Show quoted text
On your RF port (AGWPE or Serial_TNC), which digipeat aliases did you choose to be used on that port? Digipeating doesn't happen automatically on every RF port; it has to be configured on a port-by-port basis. For example,
you wouldn't want everything coming in from 2 meters with a WIDE2-2 path to be dumped to an HF port at 300 baud.
The Digipeat tab is control across all of YAAC, but you also have to set up digipeating on each RF port individually, to properly handle cross-band digipeating and related services.
Hope this helps.
Andrew, KA2DDO
author of YAAC
________________________________________
From: [email protected] <[email protected]> on behalf of Ian Morrison <Ianm3920@...>
Sent: Friday, December 8, 2023 11:28 AM
To: [email protected]
Subject: [yaac-users] YAAC wont digipeat
I must have changed something, but I don't know what.
The following is set under the digipeat tab:
ALIAS ??????WIDE 1-1? checked
????????????WIDE 2-2? checked
SELECTED DIGIPEAT PATHS?WIDE2-2
All else blank.
The systems is working fine tracking my car, reporting weather, sending beacons and status.
Thanks ,
VE3EP?Ian
________________________________
