No, just use the Yaesu port type in YAAC. You need to set your station position in the beacon, regardless of whether you enable the beacon, so the Home button works correctly.
If the packets are appearing in Raw Packets, what kind of packets are you receiving? If they don't have positions in them, then you won't see them. If there are position reports in the raw packets
that aren't expired according to the packet timestamp,? then the stations will appear on the map at their reported positions.
Are you looking at that location on the map? The lower left corner of the map tells you the last map position the mouse cursor was over; is that anywhere close to the stations' reported positions
(including the hemisphere; East longitude != West longitude).
Andrew, KA2DDO
author of YAAC?
Andrew,
I did find the location was wrong for a fixed location, and I fixed that as the first issue. ?I will check the port, but are you saying slect the Kenwood selection and change it to Yaesu? Also if the data shows up in the raw packets and the stations show the
data will not be on the map. ?
On the beacon I did not turn it on becasue YAAC cannot beacon on YAESU radios. ?
Thank you,
Tim?
KM4ESU
_._,_._,
_._,_._,_
