Hello,
I've been really impressed with YAAC. I have set up a Rpi3 with TNC-PI2 connected to a yeasu 2980R 2m rig.? I originally started with a windows 7 machine running APRS IS/32 which worked great for last couple of months but I wanted something more portable that I can put at a repeater site my buddy has space in so I moved to the TNCPI.? I set up APRX first but it lacks good message management and a basic GUI and I really want to use YAAC.? Which brings me to my one problem:
I can't seem to get IS messages back out over RF despite having a Supplemental IF filter set and a filter set on my IS port.? On the other apps I had no problem testing sending from my APRS client on a phone / tablet out to my HT over IS > RF and back again from HT to Phone from RF > IS.? Both RF and IS igating are configured.? I'm assuming it's something to do with the filter OR my digipeat path settings but at this point I'm so turned around I can't get what was working quite easily on my last two configurations to work with this.?
Could someone check out my configs and let me know what I'm missing?
My callsign SSID assignments are as follows:
AG7GK-2 is the Igate / Digipeaters (RF AND APRS-IS CONNECTED)
AG7GK-7 is my HT, a yaesu FT2D
AG7GK-8 is my Iphone / Ipad (depending on which is connected and on) connected to APRS-IS
Main expert General config screen(don't see any relevant settings):
Note: Whenver I set a supplemental Tx-Igate filter it does not "store" in this field, I can't tell if it's working or if it is getting overriden by the APRS-IS port filter.? At this time i set that filter to m/120, or 120km range from my beacon location.?
I have RF>IS AND IS > RF gating enabled
Here are some examples of messages:
My HT beacon and raw filter from YAAC entry:?
I confirm that message and show good path on APRS.fi through AG7GK-2
Mesa from AG7GK-2 to AG7GK-7 over RF worked great, ACK received from AG7GK-7 TO AG7GK-2
I sent a message back from the HT AG7GK-7 over RF to AG7GK-2 and received and ACK on the HT
Testing from HT TO pocket packet AG7GK-8 i do not receive an Ack? though the phone sends it:
What issue do I have with my digipeat / igate settings or paths??
Thanks AG7GK
Aaron Jones
Aaron Jones
