Another possible issue is that the windowing graphics library is not always highly responsive, so the redrawing of the blinkenlight from red to black might be delayed until the library or graphics driver decides to repaint that widget. I have seen issues (usually when scrolling) when part of the scrolled window doesn't update immediately.
Andrew, KA2DDO
author of YAAC
________________________________________
From:
[email protected] <
[email protected]> on behalf of Andrew P. <andrewemt@...>
Sent: Sunday, October 16, 2022 9:00 AM
To:
[email protected]Subject: Re: [yaac-users] next beta build#179 of YAAC, created 2022-Oct-11
What is the port type of the RF port? For AGWPE ports, I had to put in a timer to guess when the blinkenlight should stop being red, because the TCP socket connection can send the packet to AGWPE/DireWolf/Soundmodem/etc. far faster than the software TNC can actually send the packet out to RF, such that you would never see the blinkenlight as red (less than a millisecond to forward the packet to the TNC). Maybe the timer is incorrect, so it's holding it red _longer_ than it should be.
I'll look into it.
Andrew, KA2DDO
author of YAAC
________________________________________
From:
[email protected] <
[email protected]> on behalf of Pascal Charette <ve2pcq@...>
Sent: Sunday, October 16, 2022 8:43 AM
To:
[email protected]Subject: Re: [yaac-users] next beta build#179 of YAAC, created 2022-Oct-11
Hi Andrew,
Not a big deal, but some time the RF port, mine is the TX one, it stay RED without PTT.
In the beginning I was concerned but I realized that the DIGI was not on TX during it was showing in RED.
Pascal, ve2pcq
Le sam. 15 oct. 2022 à 15:18, Demetre - M0SUY/SV1UY <demetre.sv1uy@...<mailto:demetre.sv1uy@...>> a écrit :
Hi Andrew,
The DIGIpeater in Beta#179 is now working FBFBFB at our IGATE!
Thank you!
73 de Demetre M0SUY
