开云体育

Thanks to all for your suggestions! Everything very interesting! My X6100 still has a valid warranty so I'll try Radioddity first before opening the seals... We'll see and I'll let you know about

Hi. Could you also check recorder functionality? Previous version of buildroot built libsndfile without LAME/MPG123 support, event if these packages was selected. I used this (

Hi Franco, with this patch CW Decode and FT8 is working again. For me, I like it when a newer buildroot is used, because the currently used one needs e.g. patches to work with actual Compilers, here

Markus, I found out that sometime between the buildroot version used by Oleg/Georgy and the latest 2024.11 version, PulseAudio changed the names of their devices. For instance what used to be called

Fantastic job. Congratulations for the work. It works great. I have an idea for next versions: auto send FT8 receptions to pskreporter.info 73 de Valentin

Thanks Mike.

I'm using my trusty MFJ 868B Big Meter. It always seems to be accurate with all my radios. Terry

Just looked at your youtube video. At 21.074 I get birdies at exactly the same place as your noises. However, Not as strong. Both 0.28 and original Xiegu firmware have those birdies at the same signal

I've been checking it out. At 10 Watts and the amp off it transmits 10 W.? Looking at the waterfall, I could see the signal. I switched on the amp and switched off the PA. The amp reported ~3

I have a strong noise on all bands when using Battery with Alternative Firmware v0.028.0 -Problem is shown on RX. -I don't see that on TX but I hear my own voice on the speaker if I call SSB.

The name "Shadow charging" was invented by Oleg, after my suggestion of the feature. Stock fw only had options Charger On or Charger Off. If you wanted to charge the battery with the supplied external

I run 10w out of the X6100 with the amplifier on, and the pa set to off with no issues. I have not tried with the amplifier turned completely off. I am sure there would be losses going through the amp

Georgy, I understand 100% and, as you can see in the comments here, there are still bugs with FT8 and CW that I need to figure out. This said, I think you may still want to look at the patch I wrote

Regarding the charging of the internal battery of the X6100, you may want to take a look at my post ten or so days ago: /g/xiegu-x6100/message/6468 and perhaps collect some

Hi Gregory, this firmware is amazing!? Here is an idea for some of the developers.? What about some limited JS8 functionality.? I find JS8 helpful when doing POTA/SOTA and there is no cell signal

Just some observations: * Output power with external power supply jumps to 7W, without - only to 5W (looks like limiting) * ALC always 100 without external power supply. * Waterfall without external

I guess, I'll use your version in one of the future build, but maybe not for the next one. I'm stuck in refactoring and falling deeper and deeper)) -- Georgy // R2RFE

Sounds like RF getting back into the radio. Have you tried it with a dummy load or another antenna? You might need more choking in the cables. I see one on each cable but that may not be

My original x6100 led flashed while charging. Recently purchased a replacement after the old one developed a fault. The led stays on while charging with the new one but it does charge. Mine charges

Hi! It's very nice to see development still going strong.. I have been away from the hacking scene and radio in general for a while, it makes me happy to see the projects have taken off. Thanks for