I have a strong noise on all bands when using Battery with Alternative Firmware v0.028.0
-Problem is shown on RX.
-I don't see that on TX but I hear my own voice on the speaker if I call SSB. Monitoring level is at 0.
-Shows up at beginning of the band and at the end.
-With or without antenna.
-Noise goes to minimal, but still there, when the screen dims out after a few seconds not touching the VFO or any button in the radio.
-Goes up again, as soon as I wake up the radio by touching the VFO or any other button.
-Goes off as soon as I plug in the external power.
?
In brief: The problem is not there or does not show up if using external power.
With Battery the radio shows 7.8V on the screen.
With external power shows 13.6V on the screen
Happens in all bands.
Not happening with standard Xiegu Firmware
App V1.1.9 Sept 14 2024 12:11:57,
Base V1.1.8 Sept 15 2024, 15:22:37
?
I made a video that shows the problem live for you to see.
?
Suggestions what could be happening are welcome.?
?
73
Rob
YS1RS
Roberto - YS1RS