开云体育

I'm using my trusty MFJ 868B Big Meter. It always seems to be accurate with all my radios. Terry

Just looked at your youtube video. At 21.074 I get birdies at exactly the same place as your noises. However, Not as strong. Both 0.28 and original Xiegu firmware have those birdies at the same signal

I've been checking it out. At 10 Watts and the amp off it transmits 10 W.? Looking at the waterfall, I could see the signal. I switched on the amp and switched off the PA. The amp reported ~3

I have a strong noise on all bands when using Battery with Alternative Firmware v0.028.0 -Problem is shown on RX. -I don't see that on TX but I hear my own voice on the speaker if I call SSB.

The name "Shadow charging" was invented by Oleg, after my suggestion of the feature. Stock fw only had options Charger On or Charger Off. If you wanted to charge the battery with the supplied external

I run 10w out of the X6100 with the amplifier on, and the pa set to off with no issues. I have not tried with the amplifier turned completely off. I am sure there would be losses going through the amp

Georgy, I understand 100% and, as you can see in the comments here, there are still bugs with FT8 and CW that I need to figure out. This said, I think you may still want to look at the patch I wrote

Regarding the charging of the internal battery of the X6100, you may want to take a look at my post ten or so days ago: /g/xiegu-x6100/message/6468 and perhaps collect some

Hi Gregory, this firmware is amazing!? Here is an idea for some of the developers.? What about some limited JS8 functionality.? I find JS8 helpful when doing POTA/SOTA and there is no cell signal

Just some observations: * Output power with external power supply jumps to 7W, without - only to 5W (looks like limiting) * ALC always 100 without external power supply. * Waterfall without external

I guess, I'll use your version in one of the future build, but maybe not for the next one. I'm stuck in refactoring and falling deeper and deeper)) -- Georgy // R2RFE

Sounds like RF getting back into the radio. Have you tried it with a dummy load or another antenna? You might need more choking in the cables. I see one on each cable but that may not be

My original x6100 led flashed while charging. Recently purchased a replacement after the old one developed a fault. The led stays on while charging with the new one but it does charge. Mine charges

Hi! It's very nice to see development still going strong.. I have been away from the hacking scene and radio in general for a while, it makes me happy to see the projects have taken off. Thanks for

This is very interesting. This is very much the problem I am having as well, but with stock firmware. I just created another thread about a problem with audio on Tx on battery and it might be due to

Hi everyone, My Xiegu X6100 has a very weird issue. If it's running on an external power supply it works fine but if it's working on battery then it makes an unbearable noise on Tx. I recorded a

Hi to all, I've noticed some problems regarding charging X6100 internal battery while using firmware R1CBU/R2RFE 0.28. Battery was weak (7V or so) so I decided to charge overnight with OEM charger

Markus, thanks for giving it a try and reporting the issue with FT8 and CW decoding. I am going to look at that over the weekend. Jason, since Markus was able to build it on Debian, which is very

I have the same set up. I will experiment to see if I can shed some light.? ?BTW, how are you measuring the output to the antenna? -- KD9YKI - Mike

Hi Franco, i have sucessfully build with the updated buildroot on Debian sid. A first small test showed it boots without problems and start, but FT8 and CW decode don't work. FT8 has only a black