开云体育

Works fine first time here with Balena Etcher, which I always use for burning ISO's. 73' Ron - ON2RON

Pay attention to DC plug dimensions. Compact 12V DC supplies may have 5.5/ *2.1* mm plug while Xiegu requires 5.5/ *2.5* mm.

You don’t need any particular model, just one that puts out the required power and voltage. I actually use a little power supply when it’s on my desk, so that I can run it continuously. It’s

Hi. I always knew, that strong stations close to + or - 50 kHz from central is shown on the both sides of the waterfall/spectrum. I performed a test with a CW tone generator. Generator freq is 21.200.

I have already answered this question many times. The plans included a range editor so that everyone could set it up as they wish. Perhaps Georgy will implement this in this firmware.

Georgy develops the firmware very quickly and I do not have time to track the changes ((: Therefore, I can not say anything Spectrum beta is not really speed, it is averaging. 73!

Incredible job done with the Firmware. If there is a word to describe it, will be: Superb!!! Have a question: Is it possible there is a table that could be modified to adapt the Bands to my region

Oleg, what you said may be the clue to my previous observations. I still use 2 SD cards: your`s 0.20.1 and Georgy`s 0.23r0 - changing and comparing. I love all Georgy`s new features, especially FT8

A while ago, I was searching for a power supply that could provide enough current to TX full 10W and was less noisy. I got this excellent recommendation for an inexpensive switching power

The data flow for the spectrum is not enough for a full and high-quality zoom even for x4. I used a trick for this to somehow implement it. But this spectrum is partially "invented". If you do x8, it

It's safe. I'm going to update these values in the next release. Right now switching to USB-D on FT8/4 implemented in a different manner, and not always works as expected. But FT8/4 should also works

Hi Georgy, thanks for ALL Your Great Work I`ve noticed (using 0.23rc0) that changing bands in FT8/4 with upper arrow keys results in USB-D switching to USB. Clicking again buttons: APP - FT8/4

I want an extra AC charger for my x6100.? Does anyone have a source.? Appears to not have a listing on the Radioddity site.? An Amazon search brings up something that looks like it's for an

Use alternative firmware - then it is possible (;

So is there anyone who can provide tips for increasing the waterfall contrast?

the other thing I noticed this isn't the latest firmware in the video, it 1.1.7 app and 1.1.6 base, from over a year ago which basically only added wfview not the current

After watching the video , in my opinion the person had a problem with burning the image rather than with the image itself. He had a problem with Rufus , personally I didn't , he then? tried with

No problems here or with any other of the 5 users at my Local Radio club ! Sent: 11 September 2024 18:47 To: [email protected] Subject: Re: [xiegu-x6100] IMPORTANT! WITH LAST FIRMWARE THERE IS

Is this an isolated incident ?

Because FW 1.1.8 is so much bad and with many faulth’s ... after a lot of test’s and measurements... I changed back complete to FW 1.1.6 ( APP 1.1.7 & BASE 1.1.6 ). Otherwise I use only the