开云体育

It would work best near the transceiver in my opinion.

Sorry, I do not.

Mike, are you using any kind of matching coil or transformer, or is it merely the 17' vertical and the radials (plus the 1:1)? -- 73 de K9NUD https://youtube.com/@learnhamradio

On Fri, Dec 22, 2023 at 07:19 AM, Gale Smith wrote: As mentioned earlier, using a choke helps, and if you have enough coax in the line, 6 or 7 turns in a 7" diameter held together with cable ties will

What type of antenna are you using? I have found that common mode current can make the radio do strange things that disconnecting and shutting down the radio corrected. Make sure you add a choke close

Thank you so much! I don’t suppose you have one for the X5105 do you? I have both radios and I always try to get a service manual for any radio I have. Until your post I didn’t even know that a

I tried to join a few times, but was rejected. The email is correct with qrz, so I just gave up.

I have a copy of the manual, and if anyone wants to add it to the files, I have attached it to this message. 73, KD9OCL

I have found that the X6100 is very sensitive to common mode current. Adding the amp will make it worse. As mentioned earlier, using a choke helps, and if you have enough coax in the line, 6 or 7

-- Mike NN3I

After much experimenting, I found the DIY antenna system in the attached photo provides excellent results.? Running 100 watts or 10 watts I get really good reports.? It's a great antenna for DX in

I also got the same issue with a Mac/MacLoggerDX with the latest CAT software update.? I have reported it to the Xiegu support team.? Seems they broke it.

I also am running this combo. I made the mistake of hooking up the house interior ground to the x125b (has a nice ground post on the back). My longwire antennas share a fairly decent ground plane with

I tied the transceiver at 80m and you were right.. everything is working smoothly.. probably an RF issue caused by the antenna (hamking hvt 400 ) ...I will wait for the dummy load to double check that

I recommend updating the basic one to 1.1.7. Some inaccuracies when working with the battery have been corrected there. In version 1.1.6, the battery capacity is calculated simply based on the current

I will setup a reference TX Oleg to test the decoding levels and let you know the results. Out of interest, I have base FW of 1.1.6 Mar 7th and APP v1.1.7 on the radio... The reason I kept the 1.1.6

I’ve doing some FT8 with the Xiegu, and in a few occasions the frequency scale was off by a few hundred kHz. After restarting the radio a couple of times, it went back to the right values. Has

Product Review - Xiegu X6100 HF/6-Meter QRP http://www.radiomanual.info/schemi/Vari/Xiegu_X-6100_review_QST_2022.pdf ?73, Steve

Are those legal or just inconvenient for the user? So they could've lied when they made this report? I can't read it because it's not that accessible. I wish they had a file or something that had

If you want to take your electronics background a little further get a tinySA Ultra Spectrum analyzer and learn how to use its functions including the signal generator part. Of course you will need