开云体育

even at 5 watts the back of the radio can get hot, I had a cooling fan until I removed the back and battery and replaced with a printed assy with a fan to keep cool. -- Gregg W9DHI, ORC Repeater

Just started using RiCBU firmware and it's great.? I was just curious as to why he limits FT8 to 5 watts, as the X6100 only does 10 watts at best. I would like a few more watts to compensate for my

Were you able to get the ALC to display on the Xeigu x6100 stock firmware? I updated to the recent FW (September 2024?) and now the ALC doesn’t display and cannot be viewed in wfView not FLrig

HTH 73 de HB3XEB Werner

*Issue/Symptoms:* *Xiegu 6100 Microphone is not picking up audio and is permanently TXing *No 8V is getting to the microphone from the radio. *No lights on the microphone. * Removing the microphone

Franco, Thank You, all gone OK smoothly, no need to do anything after writing new image to SD. Ssh key authentication works despite .ssh drwxr-xr-x permitions.

This is a good idea. This is common practice. 73!

I just thought - perhaps, it will be possible to use one more ext4 partitions - for storing actual linux configurations (/root, /etc/NetworkManager/system-connections/, etc) and handle it like the

Hi Marc, When I look to the high resolution pictures https://github.com/TemporarilyOffline/X6100-TOADs/blob/main/HiRes%20Photos/20211212_183115.jpg and the specification for USB

Today I created a new release ('20250120') based on buildroot 2024.11.1 (the buildroot changes are listed here: https://gitlab.com/buildroot.org/buildroot/-/blob/2024.11.1/CHANGES ). As you suggested,

Oleg, then I can reduce my request to the two points "set tune power" and "zero span". As luck would have it, two buttons of the SWR submenu are unused :-) Both "Zero span" and variable output power

Hello! This is exactly what the SWR scanner is made for. 73!

Greetings, I would like to propose support in the GUI for manual tuning external matching networks aka antenna tuners, for example when using Magloops - the built-in autotuner is not very useful for

The file you need to change manually is in the root partition, and it is called '/etc/init.d/S02restore_backup_configs'. After line 10, you could add another line like this: /root/.ssh/*

No problem Franco doing things by hand, i did it previously creating 'msg' and 'rec' dirs on DATA partition (aka /mnt) - necessary for recording, now i`m thinking about auto-create for this dirs?

I don't see why not. I also just noticed that buildroot 2024.11.1 is out now, so when I have some time (we just moved), I'll create a new SD card image based on the new buildroot version and with the

Looking lately at your x6100-buildroot changes on github Franco. Found in restore_backup_configs lines preserving ssh server keys - great idea, no more problems with outdated known_hosts entries. But,

My Xiegu X6100 has a problem, the USB DEV port is damaged. The internal part of the DEV port needs to be unsoldered and destroys the 3 components surrounded by yellow, blue and black (resistor and/or

This works, for me ?? /g/xiegu-x6100/message/6058

Base firmware is an internal STM32 MCU firmware. While updating from SD card only MAIN part becomes updated, but it also copy firmware file to the internal storage. To update BASE you should select