开云体育

I generally run my X6100 off of 12V and I have found that when operating CW for an extended time period it will be slightly warm to the touch. As has been discussed before on this forum, the internal

I don't think that you are crazy. I have been thinking the same thing since I started using the R1CBU firmware. To my ear the receive audio sounds much better with the rig running Oleg's firmware,

Sorry, OM. You have discovered a major shortcoming in the x6100. -- 73 de K9NUD

Geoff, The X6100 has well documented overheating issues, and many have concluded that reducing the power supply to 9 volts, give or take, is the best strategy. I have operated mine as a mobile rig

Bonjour Scot Find images of the radio. https://github.com/TemporarilyOffline/X6100-TOADs when I compare the images why is missing a (coil or capacitor) close to the coil and the 4700 resistor and

His filter settings are better , far easier to set, It could be that, Dave <groups.kc3suw.eycn2@...> wrote:

Hi Scot Why do you think that there are pl tones in the radio, Dave [email protected]> wrote:

Hi go to wfview website and look at the manual, Dave 2E0DMB

Hi, Xiegu seems to have released (2023-08-07) a new firmware for the 6100. See https://www.cqxiegu.com/zlxz for the file. A new feature, called wfserver (wfview.org) got added to the 'System Setting'

This may be a trivial question but I have only recently purcahsed the X6100 which I am using with the Pro-Audio Engineering KX33 power supply. The PSU is rated at 14 volts but the diplay on my X6100

I am a bit lat to this discussion, but after latest firmware upgrade my battery seems to behave correctly, it charges to 8.2-3V and lasts, and shuts down, as expected at about 7,2V. However, when

Would someone be able to explain to me how to set up a pl tone for a repeater on the X6100? I couldn't find anything in the menus and the manual has no mention that I could find. I'm a new ham, so I'm

Am I crazy or is the audio quality on the R1CBU firmware far better than stock? I am using an external speaker of it makes a difference. It seems like I can copy stations far lower into the noise

I was just doing some experimenting and discovered that the x6100 speaker port does not work with TS plugs, extremely quiet no matter how I set up the radio. I tried a different speaker with a TRS

My SSID has an underscore in it, no issue with the X6100 to connect to it. 73s, Michel de F5UJA

This may be a trivial question but I have only recently purcahsed the X6100 which I am using with the Pro-Audio Engineering KX33 power supply. The PSU is rated at 14 volts but the diplay on my X6100

http://cqxiegu.com/zlxz V1.1.7 Release Note Image File SHA256: BF153B10AB3D942060E65BE35A64A2D6C419A5EFF8D941E5C8CE93CE6DD44305 APP:? V1.1.7 Jul 26 2023,11:50:55 BASE: V1.1.6 Mar? 7

@kyle I? know where the code is. I asked for building instructions. I can then build it myself and check for missing parts and all. Last time I checked (don't do that every day) it ws not there and

yes, new

see https://www.cqxiegu.com/productinfo/790911.html V1.1.7 Release Note Image File SHA256: BF153B10AB3D942060E65BE35A64A2D6C419A5EFF8D941E5C8CE93CE6DD44305 APP: ?V1.1.7 Jul 26 2023,11:50:55 BASE: