开云体育

Today I created a new release ('20250120') based on buildroot 2024.11.1 (the buildroot changes are listed here: https://gitlab.com/buildroot.org/buildroot/-/blob/2024.11.1/CHANGES ). As you suggested,

Oleg, then I can reduce my request to the two points "set tune power" and "zero span". As luck would have it, two buttons of the SWR submenu are unused :-) Both "Zero span" and variable output power

Hello! This is exactly what the SWR scanner is made for. 73!

Greetings, I would like to propose support in the GUI for manual tuning external matching networks aka antenna tuners, for example when using Magloops - the built-in autotuner is not very useful for

The file you need to change manually is in the root partition, and it is called '/etc/init.d/S02restore_backup_configs'. After line 10, you could add another line like this: /root/.ssh/*

No problem Franco doing things by hand, i did it previously creating 'msg' and 'rec' dirs on DATA partition (aka /mnt) - necessary for recording, now i`m thinking about auto-create for this dirs?

I don't see why not. I also just noticed that buildroot 2024.11.1 is out now, so when I have some time (we just moved), I'll create a new SD card image based on the new buildroot version and with the

Looking lately at your x6100-buildroot changes on github Franco. Found in restore_backup_configs lines preserving ssh server keys - great idea, no more problems with outdated known_hosts entries. But,

My Xiegu X6100 has a problem, the USB DEV port is damaged. The internal part of the DEV port needs to be unsoldered and destroys the 3 components surrounded by yellow, blue and black (resistor and/or

This works, for me ?? /g/xiegu-x6100/message/6058

Base firmware is an internal STM32 MCU firmware. While updating from SD card only MAIN part becomes updated, but it also copy firmware file to the internal storage. To update BASE you should select

Are you able to link to the radio over WiFi?? if so, you might be able to manually upload the files per the attached file.? The full thread is somewhere in the Group and someone might be able to

Hello! AFAIK officially this is not possible, without further work. I created a linux-docker based frame work to mangle both known firmwares into multiboot image including the option to flash it to

The update .img? is base firmware & firmware from the gui? bundled together. Have you tried going back to V1.1.6. do that.? Where are you getting your firmware from. Try https://xiegu.eu/downloads/

Hi all. So does the iso on the SD contain both the updated firmware and the base software.? Or is the base uploaded differently. I have updated my firmware (a few repeats) which is successful but the

Hi Keith Me again. I have taken the x6100 apart and in a position to try your trick above to disconnect battery and then reconnect external power supply with SD card in. But I am just wondering what

Hi all, I recently purchased a used X6100 that is in near new condition, there is no damage or anything. However, I'm having issues with the software, in particular it is very laggy at times. When

Good grief! I thought I was loosing it. Thank you for the clarification. Using stock firmware, this is what I have understood ... PLEASE comment? Correct! Column at left talks source, the rows

R1CBU runs on top of the base software.? You need to download and install R1CBU to and SD card and boot from the SD card.? R1CBU does not over-write the stock firmware.? Unplug the SD card and you

APP: V1.1.9 Sep 14 2024,12:11:57 BASE: V1.1.8 Sep 15 2024,15:22:37 This version has only charger on/off...