开云体育

It happened to me too, but it got hot first and showed to be transmitting at 24 watts!? Luckily mine was under warranty and Radioddity sent a replacement

Try short push of power button?

Is it possible to disable the display. I hear many people complain about low battery life. However a display is only really mandatory for initial tuning after that its less useful Especially for digi

If you changed the root password on the system - you have 2 variants. First - flash an old xiegu firmware. Old versions rewrite all files on the system and should reset the root password. Second -

Yes. Sent: Saturday, October 5, 2024 5:26 PM To: [email protected] Subject: Re: [xiegu-x6100] Standard FW CW decode? Thanks, Thankfully we have .25! Rich

Thanks, Thankfully we have .25! Rich

The XIEGU FW CW decoder always works poorly. The decoder has no AFC and no automatic signal threshold. A decoder like that can never work well. Stupid programming... unfortunately. 73/6 Jens / HB9JOI

Has anyone had any luck in getting the CW decoder (send or receive) to work in the Xiegu FW? Is there a trick or setting that I am missing? It works great in .25 third party FW. Just curious. Rich

Problem I have, is that even after doing a factory reset, using userid: root, and password:123 will not allow me to login. Says denied.

I had the same problem with WSJT on older firmware (117/116?). Interestingly, MSHV worked perfectly. With the latest firmware downloaded from Radioddity (1.1.9/1.1.8) both programs work perfectly for

They are stored in your radio OS at /etc/NetworkManager/system-connections You're better off folowing the previous advice (via USB) or creating a new working wifi connection and then go in the radio

*LATE EDIT... About 30 seconds after posting this, I found the answer to my question — right in front of my eyes. So I no longer need an answer to this.* Quick question... and maybe a dumb one, so

As far as I remember, WiFi settings are not stored in the xparams.db (this table contains radio parameters), but within OS. You can connect radio with usb cable using PuTTY (or screen under linux) and

Good evening, I have been trying to connect to my X6100 via SSH, but I want a fresh clean install. When I "Factory Reset" it warns me twice, then turns off. I wait a few min 5-10, I restart it... and

That took care of the issue - many thanks! Daniel /K4DB ________________________________ Sent: Thursday, October 3, 2024 3:01 PM To: [email protected] <[email protected]> Subject: Re:

This is a Windows issue.? Put the card back into your PC.? Right click on Windows and go to Disk Managment.? Find the drive with the Boot partition and you will see another active partition with no

Just formatted the card with .25 using Rufus - put it in the X6100 and let it boot up - looks good. However, after having previously saved the files in the /DATA partition - I went to restore them

Thank you so much. 73. Joao, CT2HME

I created and uploaded patched version of the 1.1.8 BASE (same link - https://drive.google.com/drive/folders/1q9vJ-2Y2BAg6koX__cqdZlZOfNnTzmEj?usp=drive_link )

Cool, I'll drop you a line. Thanks, Scot