开云体育

(I'm on Linux.) Upon writing the image, removing the card, then reinserting it, I only see the BOOT partition. I had to start up the radio once, then I could insert it back to the computer to see both

Here's a link to report problems and bugs on the X6100. https://airtable.com/appirPn6Xox9SQny6/shrxp5huIDSvEFWv3 and a quick video refering the above mentioned link

Hi. Actual release available on the Releases page ( https://github.com/gdyuldin/x6100_gui/releases/latest ) on GitHub. Feedback is appreciated. Remember to copy files from DATA partition before

Forgot to mention.... Bought my X6100 used from eBay (only way to afford a radio). Work fine for one, year but now have receive issues. Need to replace components but, since I don't know where was

Joao, I noted that the X6100 responds to address 70 as well as A4. Gary

May I ask, which address do you guys use to report problems or software issues? Have written directly to Xiegu for a hardware problem (need to replace SMD failed components) and have never received a

I had noticed the same. 120 is allways the response. I'll take a look tomorrow and see, on an older FW, if the response is the same. CAT implementation is not strong with Xiegu... This week I reported

Well, I checked and neither flrig or wfview shows any ALC action. It just shows 100%. A CAT test program shows it always returns 120 for the ALC. So bottom line, there is no longer any ALC being

If you want a single, isolated, CAT command, you can use something like CI-V Scout, available here https://kb3hha.com/CIVScout or something like Send-CIVCommand, available here

Thanks Gary. I rely on ALC to calibrate my TX quality. I’ll check FLrig… Sent: Monday, September 30, 2024 11:53 AM To: [email protected] Subject: Re: [xiegu-x6100] ALC still missing in

Tony, Although not ideal, you could poll the radio with CAT commands to display ALC. I think Flrig will do it. Gary

I've installed 1.1.9/1.1.8.? I still don't see ALC during TX.? Anyone find a work around for this? 73, Tony

Same problem.? The plastic knob had slid toward the radio body so much that the in-out function of the knob did not work.? I'm going to put something inside the plastic knob that keeps it from

I'm stuck a bit on a GUI application, have not disassemble 1.1.8 yet. I'm going to do it after fixing some application issues. пт, 27 сент. 2024 г., 23:02 CT2HME via groups.io

Any chance you can patch 1.1.8? Txs. 73.

File Name: Xiegu X6100.ini File Version: 1.0.1 File Release Date: 20240927 File SHA-256 hash: 96f3bd709c0fd8644b79f2f04c2f0f701a5318a0ee57c8851704f41ca628fc26 File is attached to message. Tested with

Sounds a bit like a memory leak… W dniu czw., 26.09.2024 o 23:41 Jens/HB9JOI via groups.io <hb9joi= [email protected]> napisa?(a):

... ok ...ok ... Many thanks and good thoughts in development . You are the specialist ... I`m not . 73/76 Jens Sent: Thursday, September 26, 2024 11:53 PM To: [email protected] Subject: Re:

I know both issues. Seems, I fixed 2nd, but I need to check. I guess I know a reason for 1st, will limit count of rows in table, also will check.

Hoi Georgy ... ... Unfortunately, after 15 ... 30 minutes the FT8 decoder becomes slower and slower and decodes fewer and fewer signals until the decoder then stops completely and FT8 has to be