开云体育

Michael, Same thing just happened here and i'm using V.19 firmware and same xiegu FW. Issue resolved when i disconnected external power, removed the sd card completely, waited a few minutes and tried

Is the battery-management logic under the control of firmware? I.e., if I load and use Oleg's firmware, should I expect different charging behavior from default Xiegu? Lou KC1PKD

Mark, WA0ZIG ?I suggest you need to determine if the charging circuit is working.? You need to use an external 12V source with a current meter between this source and the X6100.? I see about 750ma

Does Xiegu produce radios in batches? If so, do newer batches include any physical improvements like better heat sinking and an improved battery charging system? Maybe it's just one run and done.

I think you misunderstanding.. The user interface is at 1.1.7 can be used with the baseband firmware of 1.1.6 and 99% of things work. There are 2 sides to a firmware update, the User interface and the

Dear group members, have found an issue concerning the first symbol sent at the beginning of cw transmit. Getting an pwr overshoot independent of configured pwr 0.1 - 5W in bat. mode and the same

It appears that I am the latest victim of the x6100 battery charging issue -- all of sudden the battery refuses to charge, even with the charger on, the radio off and powered by the AC adapter

'been using v0.19 over weekend... so far, so good. only issue at present is trying to figure out how to set up a few cw message memories when heading to a POTA -- 72's de k8zf, randy

Ups! I sent my reply using a phone. Didn't realize it had changed size of text when I copied the info from the web page. I just realized this morning, when reading Dido's response. Again, sorry for

Gracias Rob. Mi Komunica Pro-II cubre las bandas de 40 a 10 m y 6 m. Es una antena portable, no mobile, La utilizo fundamentalmente de 30 a 10 m. Para 40 m tengo mi EFHW. Rara vez uso esta banda en

The Komunica Pro vertical antenna, mentioned in this thread by Dido, EA1CN, is called, on my side of the “big lake”, GRA-7350TC 3/8-24 3/8" x24 CB HF 3.5MHz 7-30MHz/50MHz Broadband Telescopic

Thanks—I found link.

I had trouble getting CAT control to work with the stock firmware, but with the R1CBU firmware it "just works".? I don't even bother using the stock firmware anymore, and just use R1CBU all the time

Hi Alex, I found an adapter on eBay. Search for "X6100 HEADSET PTT" on eBay. 73, Scott

In the it‘s quite simple, as it runs from as card, test it and after this your favorite firmware vy 73 de Klaus, DC2JR Von meinem iPhone gesendet Am 17.02.2024 um 14:18 schrieb W8ISM via groups.io

For me and my poor eyesight it's the readable power level and ALC (shown in the usual format, 0 being none). Of course there are other things, but that is a huge plus.

Well, I think, it has to do something with like /dislike the usage. I for myself don‘t like the r1cbu look and feel and like very much the original firmware vy 73 de Klaus, DC2JR Von meinem iPhone

tnx to u both for replies and encouragement Dido and i r on same page when it comes to operating styles and Wintle, most of the time i can get the right info onto a SD... sure wish i had a young nerd

The important thing to realize about the R1CBU firmware is that you're NOT CHANGING anything on the radio itself. There's no commitment and nothing you can screw up on the radio. It's harmless and

so better for CW, message memories ? as the message memories seem to work fine with stock firmware …. Yes! R1CBU Firmware have a lot of memorias and (attention) have Beacon and differents times for