开云体育

Hello, Recently. my X6100 started having low RX (-122db noise or so) on startup. For a while, this could be remedied with a power cycle, but now that has stopped working.? I've seen in a previous

You'll love the radio. I really like mine even with some of its small deficiencies. One other thing make sure you do three or four complete battery discharges to where the radio shuts off and make

My X6100 has the latest software installed. None of the subject functions work on this radio.? Is there a software version that does allow operation of the?CW & Digital Decoder, FM squelch & RF

After a few years of using the G90, I'm as impressed -- maybe more impressed-- with the x6100. ?The sound with the Xiegu external speaker I got with it is very nice and makes the radio less

I think that your perspective on the X6100 is spot-on :-)

Send it back under warranty.

Performed a firmware update and hard reset, no change.

Sorry, I tried to apply the #R1CBU tag when I posted, but it didn't take. -- John Flinchbaugh john@...

Which Firmware Yiu are using ? +++ Sent: Monday, January 29, 2024 1:23 AM To: [email protected] Subject: [xiegu-x6100] reproducing the issue with the CW decoder I'd like to offer a data

See posting at https://forums.qrz.com/index.php?threads/xiegu-x6100-and-xpa-125b-amp-with-extras.899002/ For sale is my Xiegu x6100 and XPA-125B. Radio was new in October 2023 when it replaced my

When I have played with the decoder it genrally lags a few seconds to begin with as it has to work out the length of dit’s and dah’s to approximate the speed of the cw its decoding If you only

I'd like to offer a data point on the hit-and-miss decoder issues people may see. I generally find the decoder to be fine. I use it mostly while trying to practice/learn with the built-in iambic

Mike, Thanks very much for the information... I really appreciate it! ?I'm pretty inexperienced in the hobby and prefer to do things solo, so I don't have any ham club elmer-types handy to bother

Bob, KD2TTM, results with this vertical or any other will vary based on the length of the whip antenna, the parameters of the loading coil if used, the vertical's height above the ground, the length

For POTA ops, I use a 66-ft. doublet antenna fed with twisted pair wire. I connect that directly to the X-6100 antenna tuner. The radio tunes that antenna on all bands 40m - 10m to an SWR of 1.5:1 or

Just to clarify one more time ... if you need to re-verify your address you will have received an email from 开云体育 saying so, then just follow the instructions to the letter. If you having

A very good CW decoder automaticaly recognizes and set/adjust the speed , automatically adjusts to the signal level (set the audio treshold) and has a ( small range ) automatic audio frequency

When I put my x6100 in storage I go by the charge voltage and the battery indicator. The battery indicator seems to be pretty accurate when the voltage gets down to about 7.6 volts and shows half on

In version 0.17 it was equal which cw speed was set , always decoding and was outstanding . But since 0.19 functionality is over ... Sent: Saturday, January 27, 2024 5:15 PM To:

Unit received 3 weeks ago: APP: v1.17 Aug 25 2023 BASE: v1.1.6 Mar 7 2023 -- 73 DE K1TAP