Just one thing to clarify:
Have you updated both APP, and BASE? (BASE your updating simply by putting SD card to slot and booting device as usual, and APP you¡¯re updating afterwards, by executing upgrade procedure from GEN / System settings / Firmware upgrade.)
It¡¯s important to do both!
W dniu pt., 6.09.2024 o 16:03 Terry Bartholomew NQ4Y via <terry=
[email protected]> napisa?(a):
- One person on the FB group reported that on his case FW 1.1.8 gave him no power whatsoever. Reverting to FW 1.1.7 showed normal power levels.?This is something to take in consideration as it may be serious. It needs more testing on different X6100s. Again, on mine, I had no problems with power.
My x6100 has this issue. No RF power output in any mode after upgrading the BASE version to the 4 Sept 2024. Reverted back to the 7 Mar 2023 version and RF power is working. I've tried switching between the prior and current release and the symptoms are the same. I tested with and without TX-F enabled and that didn't change the lack of TX power on the new 2024 firmware version.
?
With App version 4 Sept 2024 and Base version 7 Mar 2024, the transmit RF power works normally.
?
X6100
XDC-C00 #BD
S/N: V1G#B7____
?
-NQ4Y
