开云体育

Hi Dave, 1. Is the rig going to transmit? Does the TX/RX button on the rig turn red? 2. If so, have you set the audio path correctly? When you connected the IC-7300, it should have created two audio

Dave, Please follow this carefully and see if your setup matches. If it does it will transmit fine assuming that you have audio settings in fldigi set correctly.

*I am trying to setup FLDIGI with the 7300 Icom. I have the rig control in FLRIG set correctly . The program is reading the freq with no problem. I have my radio set at com4. But I am not getting any

I select RTTY. Larry / W1DYJ

I use a Signalink for audio, connected via an audio cable in the back of the rig. I'll try PKTUSB and see what happens. Thank you.

The difference will be where the rig is getting the audio. USB on your rig probably expects to get the audio via the Mic jack and PKTUSB from a rear connector. I'm only guessing from experience since

I'm going to try RTTY with my FT-920 using FLDigi. When doing so, what do I set the drop down menu as? PKTUSB or USB? Or, does it really matter?

Lew, I don't believe there is any issue with Window 7. I don't run Windows myself, but know of those that do. Regarding RxID - Is it setup the same on both computers? There's nothing that should be

Will the latest FLDIGI? version run on an old Win7 PC? I think we have ver 4.1.9 running now.? It seems to have a problem responding to the RSID.? One of our club members questioned updating to the

As long as you received it, a 'QSL' will suffice. If not, ask to repeat it. Tom, N8EUI

No. Better yet why ? Ed W3NR

Is there a macro command to send the other person's serial number back?? I would like to use it to acknowledge I received it during a contest.? I want to send it along with the other person's RST,

Yes, on the fldigi config/Contest/General page Initalize the serial number process with entering a starting serial number then click Reset. Of course remember to increment the serial number after the

I tried this <TX><CALL> 599 <SERNO> TU GL <MYCALL> <LOG> <RX> But it did not print or send a serial number. Isn't there something that should be entered in the Contest / General,? ?(Contest Exchange

It looks like the OP NOTES field for the address and signature in FLMSG are not cleared when a new message is loaded. This appears to add the old OP NOTES to the new message,

Ken, Use the <INCR> macro command to increment the SN. Be sure to initialize the serial number in the General Contest config by choosing a starting number and then Reset. 73, Cliff, AE5ZA

Can Fldigi be setup to where when I am doing a contest, and sending the Message by macros that the serial number info can be automatically increased each time in the message I send. Or is there a way

The rig IC-7100, has macros for cw. There is no delay when the rig sends characters. ?Microham has macros you can send by keypad. I don't have a keypad but there is a provision to test the macros, no

Thanks Cliff for the reply. I got FLRIG and FLDIGI working after a change in some minor changes. Works great now!! -- WIN4ICOMSUITE MACRO FILE CQ,NU4N NU4N BK 599,UR 5NN KY NU4N,5NN KY BK , , , , , ,

In flrig config/PTT-Generic be sure PTT CAT is set to Both. 73, Cliff, AE5ZA