开云体育

Is there a way to get the user interface to come up when the flrig comes up. Just found how to do the auto start in fldigi. Dan KG7AFL

Excuse me if this is a duplicate post. I just downloaded FLDIGI last Sunday and have been trying to get it to work with my Yaesu FT-991A. After a lot of frustration, I've almost got it right. However,

Fernando, I am successful with getting fldigi to send to the log on Log4OM2. following the information from you. The function I am trying to replicate is the call lookup done at the beginning stage of

For those who have tried the OFDM modes, please note: 1. designed to operate at a fixed audio center frequency 2. DCD off not implemented, basically runs without squelch 3. not suitable for HF

I agree Robert. The OFDM modes were introduced as experimental, and the original developer, John, KL4YFD, is not an active developer at this time. David [email protected]> wrote:

Hi Bill, If you'll allow me, I suggest you ask this same question on the Log4OM forum. Since it works as desired in ACLOG and not in Log4OM, I imagine it is something on Log4om's part. Even though I

The on going Saga of the OFDM modems, might be a good idea to just remove them until they get fixed, way to may issues. The PSK modems work well enough. Robert

I am trying to find out how to have a call sign entered in Fldigi get looked up in Log4OM2 so as to see if it was worked before. I have been unsuccessful in finding any information. When Fldigi is

There's definitely something not right with the way OFDM modes function in fldigi.? When I set fldigi to OFDM3500 centered at 1625 and send a message the station on the receiving end sees only

A further look indicates both OFDM500 and OFDM750 have this issue while OFDM3500 behaves correctly. On the initial modem switch squelch is operating correctly and as you decrease squelch level to

Looks like the squelch does not have the desired effect with this modem. Dropping the squelch value for OFDM3500 has the same effect. Robert

When selecting Mode OFDM750F I get a non-stop run of text characters across the screen that do not stop unless I select a different mode (such as OFDM500F or OFDM3500). Why is this and is there a way

I have to echo the above suspicions about RFI. Program crashing plus the transceiver locked in transmit sounds very RFI-Like. In addition to the suggestions about grounding and using ferrites, I have

Make sure each piece of station equipment is bonded to a single common point. This includes the station computer as well. I make my bonding jumpers using #10 AWG auto primary wire with a ring terminal

Start looking for RFI. By some Toroids and place them on everything. It was my cure to strange effects going on on my computer with certain programs. 73 Rick N2AMG

Good evening PD1ANB, If you had a previous installation of a (somewhat) older FLdigi version, it might be a configuration incompatibility issue. Many new features have been added over the years and an

Strange problem, I have re-equipped my computer with fldigi, but now a strange problem occurs, when I start transmitting my fldigi screen disappears and it stays on transmitting. I have never had this

An excellent day for everyone. I kindly ask you to see the attached images. The indicated Power~encia of 20 W in the FLRig is ok and is the same in the Radio - TS - 990 , but the bargraph sampling is

If you want that kind of operational display asking FLTK developers for the feature. FLDIGI developers can modify another variant of the FLTK UI elements, but this introduces divergent issues down the

Why would you want fldigi to be an HF/VHF cell phone? [email protected]> wrote: