开云体育

Thanks Rich. Well, I've managed to get it all working except one minor glitch. When changing frequencies using the QSY command or clicking on a frequency in the freq window, the rig goes out of

It sounds as if you only have one-way communication between the computer and the radio: radio to computer only, not the other way. If the radio's CAT RTS menu is set to ENABLE, then the software

I wish I could help more – but when the SDR receiver of my new Icom IC-705 QRP radio was hearing thins better than my 10 y/o 5000 I gave the 5000 to my daughter and bought an IC-7610 for the shack.

Thanks Mike. I figured it can be done; it's just a matter of figuring out which rig control to use and how to program the macros. I'm currently using Fldigi for rig control but have tried Hamlib and

Well, for what it is worth…………………. My FTdx5000MP worked flawlessly. So something somewhere is amiss. But it can be done. Vy73 - Mike - KD5KC. El Paso, Texas - DM61rt. SOTA

Dave well so what happens with these are the frequencies do change in the Freq Window but the rig doesn't change which leads me to believe I don't have full CAT control for some reason. But as soon as

Jim This is what I do using macro keys: I like to quickly get to a time station such as WWV or CHU for a quick time check., but never sure which is strongest for propagation, time of day, etc. I

If I open the frequence window and double click on a frequency it will move to it. I'd like to be able to program a button to do the same thing. Jim K2QB

what if you dial to the frequency, then tell it to save click on 'open list' icon, then you will see the + and - options Dave Garber VE3WEJ / VE3IE [email protected]> wrote:

Thanks Kevin. No, the farnsworth box is *not *checked. As for the WinKeyer situation; It's working now, and I suspect operator error ;-)

Do you have this box checked in the General tab ? On the Winkeyer Tab, mine goes all the way to 0 As far as the winkeyer not connecting, does it work with any other software ? Maybe the Com

Trying to program a macro button or buttons to take me directly to the calling frequencies, i.e. 7.0715 dial frequency. I have tried using both the RIGCAT and FLDIGICAT macros using the Yaesu CAT

I've tried to reduce Farnsworth to zero, and 10 is as low as I can set. I want to have no (zero) Farnsworth. Any suggestions? This is how CW > Winkeyer config screen looks when I open it up. And

I hear BK is not really a prosign, but I'd like to make it one for the purpose of POTA. Is it doable? Also, I can't get the Farnsworth timing to zero-out in the Modem/CW/WinKeyer menu. It's stuck on

I use FLDigi to create and decode MFSK data for my show Pop Shop Radio. lately I have been sending a flag emoji next to a country name . In Tivar these decode percetly [image: image.png] In FLDigi

Hello George, Thanks for your friendly feedback! It's always good to know that the posted replies are actually read and even may be of some benefit, for a few at least... To your question, well,

Hello David, Thanks a lot for the new Alpha version 'fldigi ver4.2.06.27'. There are 2 more ITA2 Baudot shifts that would need to be implemented, please, since they still don't print correctly in

fldigi 4.2.06.27 development version available for testing Download at https://www.w1hkj.org/alpha/fldigi/ fldigi-4.2.06.27.tar.gz <https://www.w1hkj.org/alpha/fldigi/fldigi-4.2.06.27.tar.gz>

Hello Tobias, Thanks very much for the detail on the UI Scheme setting location.? It had moved from where it was previously located. I had already set the waterfall height to 100, which is the

Hello George, Please simply make your favorite setting in the 'Colors-Fonts - Buttons-Menus' section, see attachment. In case you care doing so, you can now even change the Menu font (and size!),