开云体育

Mostly addressed to Dave (W1HKJ) but also looking for others experiences: Scenario: I am now running current alphas of fldigi and flrig (autostarted) on a gamer Win11 workstation, but have seen this

correction...correction i copies and pasted wrong info.. here is correct.. jim i noticed a problem with wsjt-x and flrig with my ic7300 sometimes when i switch to a different config i had

i noticed a problem with wsjt-x and flrig with my ic7300 sometimes when i switch to a different config i had saved... wsjt-x would not connect with rig ctl...it wanted me to reconfig rig ctl... after

Hi Jack, yes I did get some ideas and also reread the manual and now my qmx will operate with FT8CN for ultra portable operating. I will let you know if I get it working with fldigi. I want to use it

Randy, Let me know how it goes. I have a QMX+ that I need to configure on a Win11 laptop. I saw that you had asked a different question on another forum. Did you get an answer there? */Jack

Thanks for the help, I understand how to do it and have created a second path for my QMX. When I get home this evening I will get it connected and hopefully setup and running. Randy VE3JO

Randy, Sometimes a "step by step" says it best. You can make fldigi run in multiple "instances" - at the same time. Only one copy of fldigi.exe needs to be on your computer. My situation: I use both

Hello Randy, Please refer to my topic 2 below. Regardless of the OS version, by creating different shortcuts referencing to different data folders, you can configure and run 'independent'

Could some one please explain to me step by step how to create a second instance of fldigi on windows 11. For some reason I am not grasping the concept. I would like to have another setup for my qmx

I would also like to point out another technicality about the OFDM modes in FLDigi in general. They technically are just multi-carrier modes, not OFDM. OFDM means that the spacing of the carriers is

Hey Dave thanks for the reply. Well finally after checking my settings I now have full 20 watts out. Works great now. Appreciate the help. Dave -- 73's de NU4N

I use both quite often sent by ve3wej on samsung s21+ [email protected]> wrote:

Hi Randy, First of all, the mismatch between the speed factor displayed on the button and the actually used one is what I had described before, saying 'Note that the figure indicated on the button

make a copy, and edit the copy. if you srew it up, delete and make a new copy.

Thanks for the information Tobias.? Except when I transmit a picture in MKSF64 it indicates Cp4 when selecting x2 and Cp2 when selecting x4. Here's a picture I received from a local station on 40

GaDay All! I went back and installed previous versions of FLrig? 2.0.0 thru 2.0.03. Those worked fine thru 2.0.03. So all is good in the world. Works just fine with the latest FLdigi build. Dave

Hi Randy and all interested in this topic, Below, you'll find my personal views, along with a few recommendations, on the MFSK image mode. As you wrote, right-clicking in the TX pane and selecting

I'm sending pictures in MFSK64. I load the picture, click x1, XmtClr. In the send window it reads: "200x254Cp4;" What is does "Cp4" indicate? Thanks. -Randy

I use “ NoMachine”. Which is free and I have used for several years to manage both my Win7 & Linux pcs remotely. www.nomachine.com 73 Dave N4CVX

Any one know how to use Any Desk or Team Viewer to look at my settings for PSK in my computer? Thanks -- *73's de NU4N*