开云体育

Could some one please explain to me step by step how to create a second instance of fldigi on windows 11. For some reason I am not grasping the concept. I would like to have another setup for my qmx

I would also like to point out another technicality about the OFDM modes in FLDigi in general. They technically are just multi-carrier modes, not OFDM. OFDM means that the spacing of the carriers is

Hey Dave thanks for the reply. Well finally after checking my settings I now have full 20 watts out. Works great now. Appreciate the help. Dave -- 73's de NU4N

I use both quite often sent by ve3wej on samsung s21+ [email protected]> wrote:

Hi Randy, First of all, the mismatch between the speed factor displayed on the button and the actually used one is what I had described before, saying 'Note that the figure indicated on the button

make a copy, and edit the copy. if you srew it up, delete and make a new copy.

Thanks for the information Tobias.? Except when I transmit a picture in MKSF64 it indicates Cp4 when selecting x2 and Cp2 when selecting x4. Here's a picture I received from a local station on 40

GaDay All! I went back and installed previous versions of FLrig? 2.0.0 thru 2.0.03. Those worked fine thru 2.0.03. So all is good in the world. Works just fine with the latest FLdigi build. Dave

Hi Randy and all interested in this topic, Below, you'll find my personal views, along with a few recommendations, on the MFSK image mode. As you wrote, right-clicking in the TX pane and selecting

I'm sending pictures in MFSK64. I load the picture, click x1, XmtClr. In the send window it reads: "200x254Cp4;" What is does "Cp4" indicate? Thanks. -Randy

I use “ NoMachine”. Which is free and I have used for several years to manage both my Win7 & Linux pcs remotely. www.nomachine.com 73 Dave N4CVX

Any one know how to use Any Desk or Team Viewer to look at my settings for PSK in my computer? Thanks -- *73's de NU4N*

I had no issue with flrig. just be sure the port is not in use by fldigi or any other program ( including logging program) Dave Garber VE3WEJ / VE3IE [email protected]> wrote:

The average output power on PSK will only be about 15 % of peak power to insure the transmit signal is clean and not producing unwanted side bars. A 20 watt transmitter should never exceed 3 watts on

How does it not work?

Dave I am trying to set up for PSK using FLRIG/FLDIGI -- *73's de NU4N*

Hey Don! Good to hear from you. It's been awhile since we last connected. I am NOT a Fan of the Omirig BUT I will give it a try. My plan is to head on down later today to our Club House in Mill

Which mode Dave? David [email protected]> wrote:

I used PCMover. Larry / W1DYJ

Steve KB6HOH I noticed that Windozes did an update on my indoor apartment Tiny PC. What used to work by UBS comes up saying it's busy and won't connect to any program like Flrig. Afterthought is