开云体育

No way to reorder other than recompile. What order are you wanting and why? Mike W9MDB

Pat, Open the fldigi configuration window and check this to be sure you UTF-8 showing. 73, Cliff, AE5ZA

Pat, Where are you getting your file from? Normally people get it from SourceForge https://sourceforge.net/projects/fldigi/files/fldigi/fldigi-4.2.05_setup.exe/download

Is there any way to reorder the list of modes shown in the Flrig Mode pulldown?? My FT-991a has the normal modes then data-u data-l data-fm cw-u cw-l c4fm.? Is there some sort of definition file for

I'm attempting to work linear sats and wondering if it is possible to store both of the split modes and frequencies to one Flrig Memory slot?? It takes some A-B swaps to get both set so it would be

I had similar problems and reverted to FLAMP 2.2.11. [email protected]> wrote:

The only version I can find seems to be Italian.? Thanks in advance for your help.

These URL's take me to the British Sundial Society website.? I tried it from two different browsers.? What's going on?

Hi all, I didn't find this in a quick search of the group, perhaps someone can help me? Last night I was using Fldigi with Flmsg and Flamp, Windows 11 laptop, on VHF (FTM-400DR radio).? All versions

Jeff and All, Please find attached the solved puzzle: all of you in the group who had suggested it was FT8 after all were perfectly right! In the archive, you'll find a brief 'Analysis Report' and the

I am using N3FJP ACLog 7.0.10 with Fldigi 4.2.05 with the QRZ open image & bio page on call tab checked yes. When I manually type a call sign in fldigi, the qrz image opens up for each partial entry.

The consensus from more-knowledgable-than-me hams here and elsewhere is that this is FT8, and that if we could compress it down to the FT8 bandwidth, it would properly decode. I did cycle through a

Anyone try Olivia for decoding? sent by ve3wej on samsung s21+ [email protected]> wrote:

Hello I started Fldigi 4.2.05 on my Win10 machine and experienced several crashes when I would try and Maximize the screen. I deleted and reloaded Fldigi several times and finally stable. What is

I'm using WinKeyer along with FLDigi, and there seems like a long lag, (at least in the context of contesting), between when I execute the macro and when the message actually starts transmitting.

I am still having trouble sending CW with fldigi. It turns out that dxlab winwarbler works just fine for CW and sometimes fldigi works right after using winwarbler. Powering down the transceiver and

I have seen this signal as well and haven't been able to identify it. All I can gather is that it's 8 distinct tones in 500Hz bandwidth with a very low symbol rate. Other than that, I have been

It appears to be a harmonic of a Very Overdriven FT8 (12 seconds) signal

Andrew, thanks for your input. I am still going to give the D-U and D-L approach a try. Nothing to lose. Bill KD9TWA [email protected]> wrote:

I have heard that signal before. I am guessing it's one of the wsjtx modes/sub modes with a 15 sec sequence (12 sec transmit), but haven't heard it on long enough to cycle through them. It is not FT8