开云体育

Hi Matt, Try the latest fldigi alpha (4.1.23.29).? There were a number of things fixed in the N3FJP API interface.? Let me know if this solves it for you, as I was the one doing the work on the

If using FLDIGI and N3FJP Contest log, you have to be very careful that the serial number you are sending in FLDIGI is the same as the one that is posting in N3FJP. N3FJP Will increment the serial

Thanks Dave, Just downloaded 1.4.7.80. Compiles and runs OK. Now to try it with a rig. Phil GM3ZZA

Thanks Dave, Sent from Mail for Windows Sent: 12 February 2023 16:33 To: [email protected] Subject: Re: [winfldigi] #flrig Compiling on Raspberry Pi Phil, That bug has been fixed in the alpha series

Phil, That bug has been fixed in the alpha series of commits (post 1.4.7). static Fl_Image* msg_icon; void set_message_icon(const char** pixmap) { ??????? if (msg_icon && msg_icon->data() ==

Yes I know I should post on linuxham, but my application to join is still waiting to be approved after several days. I am trying to compile flrig on raspberry Pi4 using a recent snapshot of fltk 1.4.

is there a way that I can access the detail of the? macros that i have assigned to my function keys they need a bit of tidying up, and it's cumbersome to have to right click and make a note of what

Thanks for the info Ed. I will try both Flrig and CAT control. 73's -- 73'S DE NU4N DAVE

Thanks Ed I will try both FLRIG and Cat control. 73's -- 73'S DE NU4N DAVE

This is working: Message Macro: <TX> <CALL> 599? <CNTR> <CNTR> <MYCALL> <RX> Log Macro: <LOG> <INCR> Thanks Cliff K5XOM

https://sourceforge.net/p/fldigi/wiki/7300_howto/ Ed W3NR

*I am having the power out issue with FLDIGI. I have FLRIG controlling FLDIGI. Using COM3 at 115000 baud. Reads the freq just fine. But some where I don't have a PTT setting correct. Anyone using the

My macro: <TX> 599 <CNTR> <CNTR> <RX> next macro: <LOG><INCR> Rules say RST & Serial number, so why is everyone over-thinking a simple macro ? Ed W3NR

Ken, I guess I confused things by my email. Quoting your previous email - below is what you are sending to the other station: I am suggesting remove the <INCR> from your macro quoted above. The <INCR>

Ken, this is what you reported as your sending macro: This is what I have to get serial to increment each time I send report. <TX> <CALL> 599 <CNTR> <CNTR> <INCR> <MYCALL> <RX> Take the <INCR> out of

Ken, Your first example of the macro that sends the data to the OP increments the counter. Take that out and put it after <LOG> and you should be good. 73, Cliff, AE5ZA

No, it is only <LOG> I tried this <RX><INCR><LOG> and the number doubled, Like should be 95, but doubled to 97. Next? I used <RX><DECR><LOG> and that made it come out correctly, but when I respond to

Hi All, It appears that the ability to key your rig through the ACLog API connection broke between 4.1.18 and 4.1.20.? Nothing I do in 4.1.20 or later will key up the rig, and I do not see any

Thanks Dave. I am not a programmer, but maybe someone who is will come along and make it happen. 73, Fred K2DFC

flrig etal is "open source and free (not as in free beer)" software.? The source code is available at the same place at which you downloaded the binary executable.? You are "free" to modify, build,