开云体育

Yes I know I should post on linuxham, but my application to join is still waiting to be approved after several days. I am trying to compile flrig on raspberry Pi4 using a recent snapshot of fltk 1.4.

is there a way that I can access the detail of the? macros that i have assigned to my function keys they need a bit of tidying up, and it's cumbersome to have to right click and make a note of what

Thanks for the info Ed. I will try both Flrig and CAT control. 73's -- 73'S DE NU4N DAVE

Thanks Ed I will try both FLRIG and Cat control. 73's -- 73'S DE NU4N DAVE

This is working: Message Macro: <TX> <CALL> 599? <CNTR> <CNTR> <MYCALL> <RX> Log Macro: <LOG> <INCR> Thanks Cliff K5XOM

https://sourceforge.net/p/fldigi/wiki/7300_howto/ Ed W3NR

*I am having the power out issue with FLDIGI. I have FLRIG controlling FLDIGI. Using COM3 at 115000 baud. Reads the freq just fine. But some where I don't have a PTT setting correct. Anyone using the

My macro: <TX> 599 <CNTR> <CNTR> <RX> next macro: <LOG><INCR> Rules say RST & Serial number, so why is everyone over-thinking a simple macro ? Ed W3NR

Ken, I guess I confused things by my email. Quoting your previous email - below is what you are sending to the other station: I am suggesting remove the <INCR> from your macro quoted above. The <INCR>

Ken, this is what you reported as your sending macro: This is what I have to get serial to increment each time I send report. <TX> <CALL> 599 <CNTR> <CNTR> <INCR> <MYCALL> <RX> Take the <INCR> out of

Ken, Your first example of the macro that sends the data to the OP increments the counter. Take that out and put it after <LOG> and you should be good. 73, Cliff, AE5ZA

No, it is only <LOG> I tried this <RX><INCR><LOG> and the number doubled, Like should be 95, but doubled to 97. Next? I used <RX><DECR><LOG> and that made it come out correctly, but when I respond to

Hi All, It appears that the ability to key your rig through the ACLog API connection broke between 4.1.18 and 4.1.20.? Nothing I do in 4.1.20 or later will key up the rig, and I do not see any

Thanks Dave. I am not a programmer, but maybe someone who is will come along and make it happen. 73, Fred K2DFC

flrig etal is "open source and free (not as in free beer)" software.? The source code is available at the same place at which you downloaded the binary executable.? You are "free" to modify, build,

Last time I did a RTTY contest like this I had nothing but problems with the serial numbers. I have avoided contests like this ever since. I would think a CONFIG feature could make this easier by

Does your macro look like ...<RX><INCR><LOG> or ...<RX><LOG><INCR> That is, do you log before you increment the number, or after?? Even better, you can use the <XBEG> and <XEND> to actually save/log

When I send a report, the serial No, that is in the? "S #" box? which is right under the Call sign, that number prints on the screen to the other operator. But the number that shows up in the log

Cliff - many thanks for your comment about clicking on the Reset button to get things rolling.? That was the piece I was missing. Butch - KF4HR

Well the WPX contest isn't going well.? No one would reply to me, but I can reply to them and send report and get report. But the serial number I send is one number lower that shows up in the log. I