开云体育

Ditto what Mike said. Also, I checked the manual for the FT-2980r to see if there is a data connector; there is not. You can use an external TNC or Signalink or other digital mode device, with an

I don't think Rig control is in the cards. But here is what the manual says about Packet. See Attached

Good afternoon Is there a fundamental difference between the 2980 and the old 2900? I thought the 2900 had a data jack. And if not could connect to a sound card via the mic jack. The 7800, 7900 and

My installation of FLDigi 4.1.20.14 uses a pretty coarse location for <MAPIT>, <MAPIT:adr> and <MAPIT:lat>.? Our club station is in upstate NY (FN12xa), and the three variations of <MAPIT> show the

We were using JS8-Normal which has a BW of around 50 Hz. as compared with PSK31 at 31 Hz, so roughly in the same ballpark for bandwidth. I'll put it down as reflection Doppler for now. Thanks Dave,

Thanks a lot, Dave! I have done a complete deinstallation and a new installation in the other folder and proceded as described. This helped, and I can use the program now on my notebook as well. 73

The FT2980r is a simple FM transceiver without facility to be controlled by a computer. David

Juergen, Understand. I don’t know if that is an issue with fldigi or Windows. In any case Dave Freese is the one to deal with that. I’m sure he reads everything here. 73, Cliff, AE5ZA

Jürgen, Please refer to this on line fldigi help section.? It is specific to your start up problem and provides a solution (there are others).

Jeff, Before that, read and follow carefully this wiki on setting up the 7300. It will cover everything to get it going properly. Once it is setup like this then if you’re still having issues please

Hello Cliff, the problem is not the anti-virus program, but it looks as if FLDIGI doesn't accept non-English letters: after changing the language and having a user named Juergen instead of Jürgen the

Cliff, I hate like heck to ask, but would you (or anyone else) have some time one of these days to get on Zoom and help me get this 7300 set up correctly. I really appreciate any help here, please.

Hugo, You never said which speed of JS8 you were using. After experimenting with JS8 a bit I note that there are several different speeds/widths of JS8. It could be that if you were using a wider

Dave, I made up a Mapit macro to see what it does.? The macro is just <MAPIT>.? Click on a call sign so it goes into the call box and then hit the Mapit macro and you'll get your map.? From there

Jeff, For fldigi to work the 7300 needs to be in USB-D mode, not RTTY. Choose RTTY from the fldigi menu Opt Mode to see it in fldigi. 73, Cliff, AE5ZA

Juergen, I don’t run Windows so am guessing here, but if you have an anti-virus program running, close it while you do the install. Maybe Windows required some permission to have the install write

I wanted to install FLDIGI latest version on my Windows 10 notebook today (latest Windows update) to give it a try on a Windows device (I am using it already on a Raspi 4). None of the last versions

Dave, Please post your macro. If you’ve already cleared the logging area Mapit will have no data to map so it would have to go before clearing the log in fldigi. 73, Cliff, AE5ZA

Brand new to the group. IC7300 in RTTY mode. Trying to figure out what setting I don't have right. When sending, all I hear in the monitor is a single tone. Station on other end reports same. Do not

John I am having troubles with the mapit. I put the mapit macro in my logging macro and it shows up as <RX><CLRTX>. Which should not show up and it does not got to RX or CLRTX. Where should I put the