开云体育

If you are feeling especially brave, lucky and reckless you can edit the macro definition file using a text editor.? The mdf files are in fldigi.files\macros\ You should not be executing fldigi when

Once in the macro editor then right click anywhere in the editor and the popup menu will give you the usual edit options of Copy, Paste, etc. By using these tools you can move things around easily.

Do you mean right-click on the macro button which brings up the editor? Nate? N2ADD

John, You can create macros for other stations without changing your default configuration. <WX:xxxx> = get weather data for station. You would have to know the 4 digit code for the other stations.

In most new rigs, the dial frequency is the actual frequency on transmit if you are using either CW-L or CW-U – the rig takes care of the audio tone and mode when calculating dial frequency. If you

The other day we had severe Tstorms and Tornadoes in our state, it would have been handy to have ability to check the Wx at the incoming track stations while maintaining the local setup. Yes I can

CW is an amplitude modulated signal with sidebands that extend out below and above the carrier.? The shape and power density of the sidebands is a function of keying speed and keying waveshape.?

interesting question if at 14000 and you operate CW-U you would still be legal , correct? Mel NE9A ________________________________ Sent: Wednesday, June 2, 2021 7:20 AM To: [email protected]

There are some small differences in waterfall processing between 4.1.14 and the current alpha 4.1.18.40.? The changes were made specifically to improve CPU performance and to make the waterfall

Roland, <WX:EDDK> works OK. The original poster's problem was caused by entering "http://..." in lieu of "http*s*://..." for the Access URL. David

Barry? just took picture of rig and I'm authorized to operate outside band as a Mars station?? may the God and Goddess grant you peace and tranquility all of you days On Wed, Jun 2, 2021 at 7:20,

Oh... ?one more observation. Why is the rig set to a VFO dial frequency of ? 14.000000 MHz ? Any CW signal puts you OUT of the ham band lower edge de ?k3eui

A few comments on sending/receiving CW ?with FLDIGI 1) ?The waterfall display settings ?(-25, 70) only affect what you see on the FLDIGI waterfall. They do NOT alter what the sound card hears for

Maybe helpful to locate the issue… I have also fldigi 4.1.18 and tried a little bit. What is working: <WX> without additional parameter. I tried KMDQ (default) and EDDK (near to my location). Has to

I don't know Dave, my setting were very close to yours (tried also exactly the same ones) but a difference with waterfall of 4.1.14 is clearly visibile. I attach a screenshot with fft averaging

My hardware and OS are not the same as yours, but there is no reason why the latest alpha should not give similar performance on your system waterfall set to 2x Lubuntu 20.1 ThinkCenter m90p computer,

One thing I see is that the squelch function seems not to be turned on.? It filters the gibberish that your fldigi is otherwise required to 'interpret'. Set sql? to ON? and set the level such that

I am having this problem but now it is June of 2021 and I am on the latest version of Windows.? The Flex works OK otherwise.? I have not tried FLDigi for many months.? I have checked Privacy and

thanks very much for your reply Dave. I have installed 4.1.18.40 but I cannot see difference coparing with 4.1.18.0 with same settings of course. I'm still with 4.1.14 that has a better waterfall

Ed I was referring to my display on radio? see pic may the God and Goddess grant you peace and tranquility all of you days On Tue, Jun 1, 2021 at 11:58, Ed W3NR<autek@...> wrote: Fldigi?