开云体育

Since the arrival of PSK I have only ever used Digipan. Digipan has a simple logging method which I have always found useful. If I wish to check if I've had a previous contact, all I do is click

Hello Dave, Thanks for the reply and all the good advice. I did eventually get myself sorted out, after some help! Not being a technically minded person I can be regarded as being like a partially

Hello All. I running the bridge and am using DX Labs Commander with fldigi. This works fine. However, I don't get the RF frequency displayed on the waterfall. It displays the audio frequency. Has

Hi folks - for those of us who are coming from MixW-Olivia, the settings limited themselves to selection of speed and tone number, i.e. 1000/32 or 500/16. Here in fldigi I find under

Dear friends: Is anyone on the list using FL-Digi under Vista with a Signalink USB interface? I have not been able to make this combination to work, my old home built interface worked fine under

Mel wrote: (on the win-fldigi list) Reference: http://www.w1hkj.com/FldigiHelp/Macros.html http://www.w1hkj.com/FldigiHelp/execmacro.html 1. Please always indicate which OS you are using when

I put my coat on and went out into the garden with a brush and collected leaves. Lovely day, bright sunshine, cool but nice. Deciding to have another try I saved three or four macro's by

Mel - as I understand you have saved the macros under one name and fldigi opens up macros.mdf . If you don't wish to mess around too much, just copy macros.mdf to a backup site somewhere so you

Rich - thanks very much; indeed, I have tried the one or other linux script but - q.e.d. - with nil success. Nevertheless, I take it up again later according to your suggestion and shall report here

Hello everyone, I really am having prblems with the fldigi macro's. I wish to change the first macro CQ@>I OK, this has been my procedure 1 Edit macro CQ@>I enter new text 2 Click OK 3 Go to

Fred, As I read it, the <exec> script </exec> macro pair is primarily for Linux versions. I think you may want to experiment with it and see if you can get a script from linux to work. In the linux

See if this link helps: http://www.w1hkj.com/FldigiHelp/execmacro.html It was in the online help manual, under macros. Rich WA4SXZ

Hi folks, either I am visually or mentally impaired, or why don't I find a way to embed the link to a text file in a macro? For example, I keep a "WX.txt" with the essential wx info (e.g. wx overcast

Congrats, Mel! Dave, that bloke cannot be far away! :-) I stick to the company of that black cape fellow of Sandeman... vy73 Fred DL6XAZ was curser on by

Excellent Mel, now where did I put my Jack Daniels :-). Cheers Dave G3VFP

Went into the shack this morning, checked out the computer and I was unable to TX on Digipan or PSK-PAL. I checked the mouse and curser on fldigi and the curser still wouldn't lock in to a PSK signal

Hello Fred, I believe I did what you suggest, which I what I've always done with Digipan, move the curser to the PSK transmission, click it and it stays on the yellow track and starts decoding. When

Hi Mel - welcome to the club! :-)) I mean fldigi. So you got rx already, and within short you will have tx as well. Re cursor, to tune to psk signals, just bring the track into the centre of the two

Hello, I copied every setting on the Help Page and now I have a receive on PSK. Yippee ! However as is the norm with me, Sods Law appeared, I've lost transmit on Digipan and PSK-PAL. I always label

If someone will either provide me with a pdf or a link to one which describes the FT-757GX command set I will put together a rigCAT xml file for the transceiver. Dave