开云体育

Mel - as I understand you have saved the macros under one name and fldigi opens up macros.mdf . If you don't wish to mess around too much, just copy macros.mdf to a backup site somewhere so you

Rich - thanks very much; indeed, I have tried the one or other linux script but - q.e.d. - with nil success. Nevertheless, I take it up again later according to your suggestion and shall report here

Hello everyone, I really am having prblems with the fldigi macro's. I wish to change the first macro CQ@>I OK, this has been my procedure 1 Edit macro CQ@>I enter new text 2 Click OK 3 Go to

Fred, As I read it, the <exec> script </exec> macro pair is primarily for Linux versions. I think you may want to experiment with it and see if you can get a script from linux to work. In the linux

See if this link helps: http://www.w1hkj.com/FldigiHelp/execmacro.html It was in the online help manual, under macros. Rich WA4SXZ

Hi folks, either I am visually or mentally impaired, or why don't I find a way to embed the link to a text file in a macro? For example, I keep a "WX.txt" with the essential wx info (e.g. wx overcast

Congrats, Mel! Dave, that bloke cannot be far away! :-) I stick to the company of that black cape fellow of Sandeman... vy73 Fred DL6XAZ was curser on by

Excellent Mel, now where did I put my Jack Daniels :-). Cheers Dave G3VFP

Went into the shack this morning, checked out the computer and I was unable to TX on Digipan or PSK-PAL. I checked the mouse and curser on fldigi and the curser still wouldn't lock in to a PSK signal

Hello Fred, I believe I did what you suggest, which I what I've always done with Digipan, move the curser to the PSK transmission, click it and it stays on the yellow track and starts decoding. When

Hi Mel - welcome to the club! :-)) I mean fldigi. So you got rx already, and within short you will have tx as well. Re cursor, to tune to psk signals, just bring the track into the centre of the two

Hello, I copied every setting on the Help Page and now I have a receive on PSK. Yippee ! However as is the norm with me, Sods Law appeared, I've lost transmit on Digipan and PSK-PAL. I always label

If someone will either provide me with a pdf or a link to one which describes the FT-757GX command set I will put together a rigCAT xml file for the transceiver. Dave

Hi Harold As the CAT on the 757 is unidirectional it will be impossible to display the radio's frequency on the waterfall as FLdigi will not receive that information from the 757. However you should

This radio has the original CAT control which uses only one way communications to the radio with no reply. Is anyone using hamlib in win-fldigi to control a Yaesu FT-757GX? When i try to use it I get

Hello Fred, The Optocoupler I use was made by Dave, and the settings as you say are basically the same for Digipan, and PSK=PAL. I have no problem with either of those softwares, both work

Mel - thanks info. I suppose you verified the proper settings, in "Configuration/Soundcard/Audio Devices" ? Which interface are you running? When running Digipan, you got certain soundcard settings

Hello Fred, At least I'm not alone ! Went into the shack this morning, switched on the rig and the computer and checked out Digipan, all OK, next tried PSK-PAL, that's OK as well. Here we go, lets

Hi Mel - and if it were the case with the volume slider, rest assured: you are in very good company!!! Happened to me in the beginning as well but found it by chance very soon. Pse also check whether

Hello Dave and group members, I've just been reading the mail and one message in particular may solve my little problem. I downloaded FLdigi a few days ago, examined it, pressed this and tried that