开云体育

Mel, The CW bandwidth is the width you set under the CW tab of the modem menu. If you set a narrow bandwidth you may not copy stations that are slightly off frequency. I set mine to 270 hz and use a

I've been looking at all the different modes available and I'm interested to know why the CW vertical bars on the waterfall are wider than those which appear with PSK31. Also DominoEX, MFSK 4, and

HI Rich Thanks for your suggestions.When trying the rig.xml file I did make the changes for port name and speed and did use the default address of 70h for the IC7000. From what I can tell the com

I have no experience with the IC-7000. The general questions come to mind, is your unit using the default address, are you using the rig.xml with the appropriate changes for windows (port name &

I have been trying to get Fldigi Rig Control to work with my IC7000 without success. I have tried using the HamLib setup and also the RigCAT file both with equally unsatistisfying results. I am

The bands were in a terrible condition today,even 20 metres, so rather than scratch around on PSK I decided to do some decoding of CW. FLDigi does it very well,every transmission I looked at produced

Note to anyone trying to link FLDigi to the DXLabs Suite with N2AMG's bridge ----> Make sure you're using FLDigi version 3.03.1, not 3.03. The later version isn't on the FLDigi web site, but its on

Its a device that USB-serial port/USB sound card add-on device. I believe it does provide access to RTS/CTS through the virtual COM ports, and when the device is enabled to use those (instead of

You basically have two entirely different devices in your MicroKeyer II. One is the sound card codec. Opening that device for read and write should not effect the serial port that the interface is

Hello Group On my machine, FLDigi seems to always be transmitting a "silent" sound file to my sound device (MicroHam MicroKeyer II), changing to actual audio when its directed to transmit. It was

Thanks for the cudos. I've sent your reply on to Skip Teller, KH6TY, better known as the man who gave amateur radio DigiPan. He has been one of my right hand men for fldigi development. Dave

Hello Dave, That really is good news ! The Digipan log probably wasn't used by most hams because its simple and doesn't include sufficient information but for me it was perfect, so as the one you are

Yes Mel. But you must wait for the next release of fldigi. It will have a full logbook built in with contesting features as well as recalling data on the current contact (if available). Dave

Since the arrival of PSK I have only ever used Digipan. Digipan has a simple logging method which I have always found useful. If I wish to check if I've had a previous contact, all I do is click

Hello Dave, Thanks for the reply and all the good advice. I did eventually get myself sorted out, after some help! Not being a technically minded person I can be regarded as being like a partially

Hello All. I running the bridge and am using DX Labs Commander with fldigi. This works fine. However, I don't get the RF frequency displayed on the waterfall. It displays the audio frequency. Has

Hi folks - for those of us who are coming from MixW-Olivia, the settings limited themselves to selection of speed and tone number, i.e. 1000/32 or 500/16. Here in fldigi I find under

Dear friends: Is anyone on the list using FL-Digi under Vista with a Signalink USB interface? I have not been able to make this combination to work, my old home built interface worked fine under

Mel wrote: (on the win-fldigi list) Reference: http://www.w1hkj.com/FldigiHelp/Macros.html http://www.w1hkj.com/FldigiHelp/execmacro.html 1. Please always indicate which OS you are using when

I put my coat on and went out into the garden with a brush and collected leaves. Lovely day, bright sunshine, cool but nice. Deciding to have another try I saved three or four macro's by