开云体育

Yep. Was there. Not to be picky, but as a newbie to /this/ subject, I was not sure what "GPIO3 (RA-Board)" actually meant...because it doesn't /say/ needs extra purchase, as many of the other digirig

*https://digirig.net/choosing-digirig-model/* (look in the PTT methods row) OK.? I was wrong about the regular digirig mobile -- it can't do the "RA Board" PTT method.? It can do PTT via CAT

I have a regular digirig, and this is the first I've heard about RA Board. I did some research, and it seems (can't find an /explicit/ statement on the digirig site) that with the digirig lite you

I am having problems doing CW Keying from the FLRIG program. When I go to Keyer | CW Keyer and type a message and press Send/Pause, the transmitter doesn't transmit but the software acts as if though

I've used "real" PTT via digirig on HT with both digirig and digirig lite.? Been a while tho. There are at least two ways to PTT with a digirig.? One is via the serial port. This is only with a

Can you post the specifics of what you did? Did following Tobias' steps do the trick? Thanks, ~R~

Thanks to all. After a few tries I was quick enough to get to the list. I did find a post from a few years ago about editing one of the xml files, but the method in this thread worked. Of course this

Gordon, On Dave's site index page there is a link to 3rd party software, the one you want is FlDigi - DX Labs Gateway. https://w1hkj.org/3rdparty.html? -? which brings you to N2AMG's place - You

Try here https://www.n2amg.com/software/fldigi-dxlabs-gateway/ I have used it for years with no issues. 73, Bob N3PPH

Can I have fldigi log to DXKeeper, and if so how? Thanks, Gordon - n1mgo

Your Port Audio playback device is the same as your audio alerts. I would start by disabling audio alerts. Maybe then you can activate Port Audio and fix the playback device.

If Win 10 is current, is permission given for apps to access the mic? See Privacy. 73 Rich NE1EE The Dusty Key On the banks of the Piscataqua

Hi George, I am not sure that this will help, but please try the following 2 items. In your VAC control panel, set the minimum supported sample rate to a really low value, this shouldn't hurt and

I meant to say, that clearing the message leaves Port audio grayed out. except for its radio button.? Clicking on it yields the error message once again.

Greetings, I am using the latest version of FLDigi on my Win 10 desktop. I was trying to select one of my Virtual Audio Cables and I get the message shown on the attached picture. I have Restarted

I don't have or use a digirig so I apologize if my earlier comments were misleading. My primary use of fldigi and flrig are for HF data modes where the radio is directly exposed to the software in the

Taking the CIV plug on a IC 746. I was giving info on how to create a patch cord, the female plug read sleeve and the tip took that data and moved or changed the VFO. I used that radio on Winlink

The IC-738 is an IC-736 without the internal PSU. I foolishly bought an IC-736 second-hand but never got it working with CAT software. It's 1990's vintage radio. It does have a CI-V interface, but I

Tom I see D74 and Digirig. I'm assuming that Digirig is plugged into Mic and Speaker port on the radio. If so Playback on computer is TX (PTT) and Recieve is Mic on the computer. The squelch is off

Thanks for the update... Your comment below ... I have observed in Windows when either fldigi can't find the audio service OR permission to access the "mic" is turned off, fldigi complains at startup.