开云体育

In Hamlib is appears the FTDX10 is almost 100% compatible with the FTDX101D/MP. Mike W9MDB

Cliff, I have been using the FTDX101D and the only issue is the width not completely working, and it's missing a button to set/disable split. I think that's what Matt was originally talking about as

I'm only in IT so I'm not much of a coder, but if it only involves taking Matt's xml file and making something similar in the fldigi code, I could take a crack at it. Thanks for the fl-suite, some of

Hello Andrew, I'll add the FTdx10 to my work list for flrig.? But I'll also entertain any volunteer programmers as well. David, W1HKJ

Andrew, Have you tried the FTDX101D or MP rig choice in flrig and see if it works? If it works, but has limitations then start a new topic and give those limitations. It’s up to Dave whether he

Is it possible to ask for the FTDX10 to be supported in flrig? I can make a separate topic if needed. Thanks and 73, Andrew K8AKC ‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐

Matt, Flrig does not use any external config file like RigCat does. All the settings are built in so you can only change things by changing the flrig code. The supported rigs should be good to go as

I find that FLDIGI works just fine using either RIGCAT? with the correct XML file installed for the 599? ?Or using the Eagle {untested} HAMLIB configuration. As to Rig Cat, never could get it to

Hi Dave, I'm the original uploader. I think it works as intended. As to working with flrig, I can't comment on that, I tried to look at flrig, but I could not find the a config file or anything to

Hello all- I have been using DXLabs Commander to control my Eagle on Win 10 machine, works well. Now I tried to control it with FLRIg. I can't get it to connect, same com port and speed. I also

at http://www.w1hkj.com/alpha/fldigi/ FSKconfig.png <http://www.w1hkj.com/alpha/fldigi/FSKconfig.png> 2021-10-25 18:54 54K fldigi-4.1.20.33.tar.gz

at http://www.w1hkj.com/alpha/fldigi/ Includes a feature that has been on the wish list for the past 18 years: ??? FSK keying for 45.45 Bauot ONLY ????? * add ability to key xcvr in FSK

Cliff, Tanks.? I did QSY today and as you suggested as well, it did it.? So I changed my memory setting on my ic7100 dropping 1900khz.? That puts the signal in the center.? Just one of those

No. 73, Cliff, AE5ZA

Is FLDigi (Windos or Pi) able to decode ARDOP? 73s, Ed, KD9FRQ

Happened to notice today that FLLog 1.2.7 uses about 196MB on my Win 10 machine. Doesn't really cause a problem, but seems like a lot of memory usage for such a small program. My data file is about

Do you have your Sweet Spot set to 1500 and have you tried the QSY button to center? 73, Cliff, AE5ZA

Hi all, I am confused.? Not really surprised.? The directions are clear, and simple.? I use Win4ICOM which has an SWL list.? So I do not even have to enter anything to get to 6340.5 USB.? Yet

Files sent WA4MIT

Thank you Andrew.? Let me know you think it is ready for me to publish on both Source Forge and the w1hkj.com web sites. David, W1HKJ