Good evening,
?
I am new to Flrig/Fldigi.? I followed instructions on this video , but am getting an error when I try to init flrig.? I am using a Yaesu FT891 with Digirig.? If anyone has any suggestions, I would greatly appreciate it.
?
Error:? Transceiver not responding!
?
?
Here is the results of my trace:
flrig 2.0.05
03:32:06.218 : check()
03:32:06.343 : ?S: ?FA; ?R: ?
?
?
From debug_log:
[03:32:06.129] I: ConfigurePortA:?
Set Comm State:
DCB.DCBlength ? ? ? 28
DCB.Baudrate ? ? ? ?19200
DCB.ByteSize ? ? ? ?8
DCB.Parity ? ? ? ? ?0
DCB.StopBits ? ? ? ?0
DCB.Binary ? ? ? ? ?1
DCB.fDtrControl ? ? 0
DCB.fRtsControl ? ? 1
DCB.fDsrSensitivity 0
DCB.fParity ? ? ? ? 0
DCB.fOutX ? ? ? ? ? 0
DCB.fInX ? ? ? ? ? ?0
DCB.fNull ? ? ? ? ? 0
DCB.XonChar ? ? ? ? 17
DCB.XoffChar ? ? ? ?19
DCB.fAbortOnError ? 0
DCB.fOutxCtsFlow ? ?0
DCB.fOutxDsrFlow ? ?0
[03:32:06.139] I: SetCommunicationTimeouts:?
============ ? ? COMM TIMEOUTS ? ? ================
Saved Read Interval Timeout............... 0
Saved Read Total Timeout Multiplier....... 0
Saved Read Total Timeout Constant Timeout. 0
Saved Write Total Timeout Constant........ 0
Saved Write Total Timeout Multiplier...... 0
===================================================
Set Read Interval Timeout................. -1
Set Read Total Timeout Multiplier......... -1
Set Read Total Timeout Constant Timeout... 1
Set Write Total Timeout Constant.......... 0
Set Write Total Timeout Multiplier........ 0
===================================================
[03:32:06.155] D: startXcvrSerial:?
Serial port:
? ? Port ? ? : COM3
? ? Baud ? ? : 6
? ? Stopbits : 1
? ? Retries ?: 2
? ? Timeout ?: 50
? ? Loop ? ? : 500
? ? RTSCTS ? : 1
? ? CATptt ? : 1
? ? RTSptt ? : 0
? ? DTRptt ? : 0
? ? RTS+ ? ? : 0
? ? DTR+ ? ? : 0
[03:32:06.296] E: ReadBuffer: ReadBuffer FAILED [15.62 msec], read 0 bytes
[03:32:06.327] E: ReadBuffer: ReadBuffer FAILED [15.62 msec], read 0 bytes
