I know several of those who post here have reported good results with Fldigi and Win11, but
we here have not.
The subject computer is a new Acer Aspire 3 which came with the latest version of Win11.
After messing around with this thing for the past two or three days, we find that Win11 has
reversed the two ports for Fldigi's receive and transmit functions.
We have set the computer's audio settings to the Realtek Speakers, and its input to the
onboard microphone. These work correctly.
We have also set the communications device settings to the Fldigi choices, although what
SHOULD be the RECEIVED signal from Fldigi, Win11 sees as the MIC input,and the MIC
input to Fldigi is seen by Win11 as the SPEAKER output
The audio level control for the Fldigi ports is set permanently at zero and cannot be
increased. It is grayed out.
This occurs with two different interfaces, 1) a SignaLink USB unit, and 2) a West Mountain
RigBlaster Advantage.
And there appears to be no way to reverse these settings, except by physically reversing the
two connections within the Signalink or Rigblaster.
We have updated Win11 to the laatest verion and have searched the internet for possible
solutions. finding none.
At this point we are fed up with fooling with this, and have installed a new version of Win10
Pro 64 bit on the laptop.
Ken W7EKB
--
This email has been checked for viruses by Avast antivirus software.
www.avast.com
--
Ken Gordon W7EKB
