Check out the online help for fldigi. available via the menu.
toggle quoted message
Show quoted text
Correct. PTT is different from the data being transmitted. Try PSK31 and see if it works. If not there is no sound data getting to the transmit stream in fldigi.
On Oct 11, 2024, at 16:08, mike isakson via <
w7xh.mike@...> wrote:
cliff,
to be clear, fldigi cq call keys the transmitter. The problem is that it is a constant tone during transmission. There is no diddledhen the transmitter is keyed.?
73 Mike
Mike,
Sounds to me like a sound card issue. Not connecting on transmit. Maybe on wrong channel or need to put it on both channels??
What about other modes? Do they work ok on transmit?
On Oct 11, 2024, at 15:00, mike isakson via
??<
w7xh.mike@...> wrote:
Don, if I try to send a cq , the transmitter is keyed but i get a constant carrier sound no dittle. I use flrig, fldigi and n3fjp and rig control is great, if I send rtty from the radio directly it decodes in fldigi. I will look at the link you provided. Thanks for your response.
73 W7XH
Mike
Are you getting PTT signal sent (radio should go into transmit mode)?
Are you putting out?any power (use power meter option on IC-7100)?
Initially I could receive?but not send also.
I found the following helpful and when I reset according to these instructions?all worked.:
Note: I had trouble with autobaud on CAT and a fixed setting of 19200 seems to have resolved this issue.
On Fri, Oct 11, 2024 at 10:53?AM mike isakson via
??<w7xh.mike=
[email protected]> wrote:
Call sign W7XH
I am hoping to ask the group about a problem I am having with my IC-7100 sending a continuous carrier . I do not get? a diddle. I have tried both 4.1.20 and 4.2.05 fldigi and flrig 1.4.2 and 2.0.05.
I? have installed IC 7100 usb drivers and am connected with a usb-a cable. The radio is set to RTTY . I have rig control with flrig,fldigi, and N3FJP operation. If I send a rtty message directly from the radio, fldigi decodes it perfectly. I am just not able to send.
73 Mike W7XH
--?
