Don, if I try to send a cq , the transmitter is keyed but i get a constant carrier sound no dittle. I use flrig, fldigi and n3fjp and rig control is great, if I send rtty from the radio directly it decodes in fldigi. I will look at the link you provided. Thanks for your response.
On Fri, Oct 11, 2024 at 11:32?AM Don Rolph via <don.rolph=[email protected]> wrote:
Are you getting PTT signal sent (radio should go into transmit mode)?
Are you putting out?any power (use power meter option on IC-7100)?
Initially I could receive?but not send also.
I found the following helpful and when I reset according to these instructions?all worked.:
Note: I had trouble with autobaud on CAT and a fixed setting of 19200 seems to have resolved this issue.
On Fri, Oct 11, 2024 at 10:53?AM mike isakson via <w7xh.mike=[email protected]> wrote:
Call sign W7XH
I am hoping
to ask the group about a problem I am having with my IC-7100 sending a
continuous carrier . I do not get? a diddle. I have tried both 4.1.20
and 4.2.05 fldigi and flrig 1.4.2 and 2.0.05.
I?
have installed IC 7100 usb drivers and am connected with a usb-a cable.
The radio is set to RTTY . I have rig control with flrig,fldigi, and
N3FJP operation. If I send a rtty message directly from the radio,
fldigi decodes it perfectly. I am just not able to send.
