开云体育

Yes Phil the radio transmit light come on but no tx output.Audio is picking up signals no problem on FLDIGI and FT8. Just not power out.

Thanks for the reply

Hi Dave,

?

1. Is the rig going to transmit? Does the TX/RX button on the rig turn red?
2. If so, have you set the audio path correctly? When you connected the IC-7300, it should have created two audio ports as well as the COM4 port. You need to connect the audio ports – indicated as USB Audio Codec or similar.
1. It helps to rename these codec ports as IC-7300 TX and IC-7300 RX or similar so that you know what they are.
2. Configure fldigi to connect to these ports

?

73 Phil GM3ZZA

?

Sent from for Windows

?

From: Dave Tucker Nu4N
Sent: 10 February 2023 20:09
To: [email protected]
Subject: [winfldigi] No power output #IC-7300

?

I am trying to setup FLDIGI with the 7300 Icom. I have the rig control in FLRIG set correctly . The program is reading the freq with no problem.
I have my radio set at com4. But I am not getting any power out put. I have the 7300 set at com4 19200 Radio USB Data-1.
Any help would be appreciated

--
73'S DAVE NU4N

?

-- 
73'S DE NU4N DAVE