开云体育

Hello, I am installing my wiring harness and getting the ground straps in place. I have run my negative battery cable directly to a starter mounting bolt as per a Dr. Vern modifcation that I saw here

The low sides of the bed make it look like it should take a special camper but any slide in for a full size pickup will fit. I used an 8' slide in that had been used in a 58 Ford. When I sold it the

Congratulations Grandpa John! Is this your first? Wave to the North when you get into WA. You are arriving in the rainy season, but I'm sure you will have things to keep you from noticing the weather.

Guys(and Willys Ladies), I am looking for a full front, thick vinyl or rubberlike floor mat for my '62 &'67 CJ-5's. I have seen them for MB's and have purchased them for my wagons but have not seen

Just in case no one has mentioned it there's several old m38's etc.listed on the GSA auction this week.there in MI. some look pretty nice but their too far away for me..mark

Now that's an OT topic I like to read! Congrats, John!

Does anybody know if the Willys junk yard is still around on rt 611 in PA? Thanks' Larry

I have a '48 Willy CJ2a, w/ stock brakes. Hasn't been driven for about 2 years. I am having a problem with the brakes. I have to literally stand on them to get it to stop. Stopping fast is out of the

I'll second not to use an easy out, if the bolt is really stuck its too easy to break one, and that causes all kinds of hurt! If there is a little bit sticking out you might try taking a nut put it

The bed floor is 4 feet wide and about 6.5 feet long. Not exactly what I'd consider "long". Not sure what year Nissan you're referring to but the 80-86 models the bed floor is barely over 3 feet wide

I am finally giving in to my wife's pressure to set up a separate e-mail account solely for WillysTech messages. I am unsubscribing bakergm@... and re-subscribing as 52willyspickup. -Glenn

Wish you and the family the best. this will be a weekend to remember. Bring the camera and lots of batteries, grandpa.

That's a tough one. the bed on these trucks is rather narrow and long. I know nissan used to sell a longbed version of their truck. Perhaps that one would have similar dimensions. Does any one know

well you would want top dollar too if you were selling a vehicle with such a wonderful custom paint job... Bwaa-haa-ha! It's ummm, pretty wild in the paint department to say the least. awhile longer.

Congratulations John. When you see your son, tell him thank you from us for his service and sacrifice. -Glenn -------------- Original message from John Barrett <jbarrettII@...>: --------------

congrats. My good friend's son is returning from Irac in 10 days. SF

I would be very reluctant to use an easy out having seen too many broken off easy outs stuck in the middle of bolts. The easy out is hardened steel and almost impossible to drill out. If the bolt

Congratulations and good luck to your son and his family. Kurt V '60 Wagon Jefferson City, MO

That is how a dry sump system works. I would think you have plenty of room in the oil pan for the scavenger pump, but where would run the line from the oil tank back to the engine? My Porsche 911 uses

wrote: Looks like that was the truck that Peter Fonda used to haul his chopper around when filming Easy Rider